PARKER 68CA-8-4 Self-Aligning Brass Compression Fitting
The PARKER Compression Fitting Adapter (MPN 68CA-8-4) is a self-aligning brass compression fitting, type Compression x MNPT, supplied in a 10-pack. It accommodates a 1/2 in OD tube and a 1/4 in pipe fitting size…
SKU 3G-OTH-470572
Also listed as: 68CA84 · 68CA 8 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN 68CA-8-4) is a self-aligning brass compression fitting, type Compression x MNPT, supplied in a 10-pack. It accommodates a 1/2 in OD tube and a 1/4 in pipe fitting size. This adapter is sourced and supported by 3G Electric, a global industrial solutions provider with specialist depth in combustion, pumps, and controls, and the capability to interpret demand across 14 industrial departments.
Frequently Asked Questions
What is the PARKER 68CA-8-4 compression fitting adapter used for?
The PARKER 68CA-8-4 is a self-aligning brass compression fitting adapter used to connect a 1/2 in OD tube to a 1/4 in pipe thread (MNPT). It is common in pneumatic, hydraulic, and instrumentation systems where leak-free sealing and easy alignment are required.
What are the specifications of the PARKER 68CA-8-4?
The PARKER 68CA-8-4 is a Compression x MNPT adapter, supplied in a 10-pack. It fits a 1/2 in OD tube and a 1/4 in pipe fitting size. The fitting is made of self-aligning brass, ensuring reliable sealing without over-torquing.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies the PARKER 68CA-8-4 compression fitting adapter worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this genuine PARKER part to your facility. Contact us for availability and lead time.
How to install a PARKER compression fitting adapter?
To install the PARKER 68CA-8-4, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid over-tightening to prevent tube collapse. Always use a backup wrench on the fitting body.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
