PARKER N8BU8 Nylon Compression Bulkhead Union, 1/2 in OD x 1/2 in OD
The PARKER Compression Fitting Union (MPN N8BU8) is a general-purpose nylon compression fitting configured as a bulkhead union for 1/2 in OD x 1/2 in OD tube sizes. This union provides a reliable, leak-resistant…
SKU 3G-OTH-475858
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Union (MPN N8BU8) is a general-purpose nylon compression fitting configured as a bulkhead union for 1/2 in OD x 1/2 in OD tube sizes. This union provides a reliable, leak-resistant connection in fluid systems, backed by PARKER's engineering standards.
Frequently Asked Questions
What is a PARKER N8BU8 compression fitting union used for?
The PARKER N8BU8 is a bulkhead union used to connect two 1/2 in OD tubes through a panel or wall in fluid systems. It provides a leak-resistant, reliable joint in pneumatic, hydraulic, and instrumentation applications across industrial departments like machining, material handling, and process controls.
What are the specifications of the PARKER N8BU8 compression fitting?
The PARKER N8BU8 is a general-purpose nylon compression fitting configured as a bulkhead union. It accommodates 1/2 in OD x 1/2 in OD tube sizes. The nylon construction offers corrosion resistance and lightweight durability for moderate-pressure fluid systems. PARKER engineering ensures consistent sealing performance.
Where to buy a PARKER N8BU8 compression fitting union worldwide?
3G Electric supplies the PARKER N8BU8 compression fitting union to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this nylon bulkhead union. Contact us to source this PARKER part for your fluid system requirements.
How to install a PARKER nylon bulkhead union?
To install the PARKER N8BU8 bulkhead union, insert the tube fully into each end and tighten the nut finger-tight, then use a wrench for an additional 1/4 to 1/2 turn. Ensure the panel hole is sized for the bulkhead thread. Avoid over-tightening to prevent damage to the nylon body.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER general purpose nylon compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
