PARKER Compression Fitting Elbow: 5/8 in OD x 5/8 in OD Size
The PARKER Compression Fitting Elbow (MPN P10EU10) is a polypropylene compression tube fitting with a 5/8 in OD x 5/8 in OD size and Compression x Compression type. It meets NSF/ANSI 51 standards, ensuring…
SKU 3G-OTH-473950
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN P10EU10) is a polypropylene compression tube fitting with a 5/8 in OD x 5/8 in OD size and Compression x Compression type. It meets NSF/ANSI 51 standards, ensuring suitability for industrial applications requiring material compliance.
Frequently Asked Questions
What is the PARKER Compression Fitting Elbow P10EU10 used for?
The PARKER Compression Fitting Elbow P10EU10 is used to connect two 5/8 in OD tubes at a 90-degree angle in industrial fluid systems. Its polypropylene construction and NSF/ANSI 51 compliance make it suitable for applications requiring material safety, such as water treatment and food processing lines.
What are the specifications of the PARKER P10EU10 compression fitting?
The PARKER P10EU10 is a polypropylene compression tube elbow with a 5/8 in OD x 5/8 in OD size and Compression x Compression connection type. It meets NSF/ANSI 51 standards for material compliance. The manufacturer part number is P10EU10, and it is designed for reliable sealing in industrial piping systems.
Where to buy PARKER P10EU10 compression fittings worldwide?
3G Electric supplies the PARKER P10EU10 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this NSF/ANSI 51-compliant fitting for your application.
How to install a PARKER compression fitting elbow?
To install the PARKER P10EU10 compression elbow, ensure tube ends are clean and cut square. Slide the nut and ferrule onto the tube, insert the tube fully into the fitting, then tighten the nut by hand plus 1-1.5 turns with a wrench. Avoid over-tightening to prevent damage to the polypropylene body.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER polypropylene compression tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
