PARKER 90-Degree Swivel Fitting
The Parker 90-Degree Swivel Fitting (MPN S2107-8-8) is a zinc-plated steel hydraulic fitting with a 1/2 in female NPSM inlet and a 1/2 in male NPTF outlet, rated for a maximum operating pressure of 3,000 psi and…
SKU 3G-OTH-649539
Also listed as: S210788 · S2107 8 8
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The Parker 90-Degree Swivel Fitting (MPN S2107-8-8) is a zinc-plated steel hydraulic fitting with a 1/2 in female NPSM inlet and a 1/2 in male NPTF outlet, rated for a maximum operating pressure of 3,000 psi and featuring a nitrile seal.
Frequently Asked Questions
What is a Parker 90-degree swivel fitting used for?
This Parker 90-degree swivel fitting connects hydraulic hoses or tubes where a right-angle turn is needed. It allows the outlet to rotate, reducing stress on the assembly. Common in industrial machinery, mobile equipment, and hydraulic power units requiring reliable fluid transfer at up to 3,000 psi.
What are the specifications of the Parker S2107-8-8 swivel fitting?
The Parker S2107-8-8 is a zinc-plated steel 90-degree swivel fitting. It has a 1/2 in female NPSM inlet and a 1/2 in male NPTF outlet, with a maximum operating pressure of 3,000 psi. The seal material is nitrile, suitable for hydraulic oils and fluids.
Where to buy Parker hydraulic swivel fittings worldwide?
3G Electric supplies Parker hydraulic swivel fittings like the S2107-8-8 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine Parker components and support your procurement needs across multiple departments.
How to install a Parker 90-degree swivel fitting?
Ensure threads are clean and apply compatible sealant to the male NPTF outlet. Hand-tighten the fitting, then use a wrench on the hex flats—avoid overtightening the swivel nut. The swivel joint should rotate freely after installation. Always follow manufacturer guidelines for torque and pressure ratings.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER 90-degree swivel fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
