PARKER Push-to-Connect Elbow Fitting
The PARKER Push-Fit Elbow Fitting (MPN W169PLP-2-4) is a nickel-plated brass tube fitting with a Push-to-Connect x MNPTF connection type, designed for 1/8 in OD tube and 1/4 in Pipe Size. This silver-finished fitting…
SKU 3G-OTH-482343
Also listed as: W169PLP24 · W169PLP 2 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Push-Fit Elbow Fitting (MPN W169PLP-2-4) is a nickel-plated brass tube fitting with a Push-to-Connect x MNPTF connection type, designed for 1/8 in OD tube and 1/4 in Pipe Size. This silver-finished fitting is part of our broad industrial solutions across 14 departments, with specialist depth in fluid controls as an authorised distributor.
Frequently Asked Questions
What is the PARKER Push-Fit Elbow Fitting used for?
The PARKER Push-Fit Elbow Fitting (W169PLP-2-4) is used to connect 1/8 in OD tubing to a 1/4 in male NPT threaded port in pneumatic or low-pressure fluid systems. Its push-to-connect design enables tool-free installation, making it ideal for industrial automation, packaging, and material handling applications.
What are the specifications of the PARKER W169PLP-2-4 fitting?
This PARKER fitting is a nickel-plated brass elbow with a Push-to-Connect x MNPTF connection. It accepts 1/8 in OD tube and has a 1/4 in pipe size. The silver finish resists corrosion. It is designed for use with thermoplastic or polyurethane tubing in pneumatic systems up to moderate pressures.
Where to buy PARKER push-fit fittings in worldwide?
3G Electric supplies PARKER push-fit fittings like the W169PLP-2-4 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER components and support your procurement across 14 departments, including fluid controls.
How to install a PARKER push-to-connect elbow fitting?
To install the PARKER push-fit elbow, cut tubing square, deburr, and push fully into the collet until it stops. For removal, press the release collar and pull the tube out. Ensure the MNPTF threads are sealed with PTFE tape or sealant before tightening. Do not overtighten the brass fitting.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER nickel-plated brass tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
