PASS & SEYMOUR PT2097HGTRWRW Hospital Grade GFCI Duplex Receptacle
The PASS & SEYMOUR Plugtail Duplex Receptacle (MPN PT2097HGTRWRW) is a hospital-grade, GFCI duplex receptacle rated 125V AC and 20 A with a 5-20R configuration in white. 3G Electric interprets this demand and sources…
SKU 3G-OTH-128851
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PASS & SEYMOUR Plugtail Duplex Receptacle (MPN PT2097HGTRWRW) is a hospital-grade, GFCI duplex receptacle rated 125V AC and 20 A with a 5-20R configuration in white. 3G Electric interprets this demand and sources the genuine OEM part, providing a single point of accountability across 14 industrial departments — with specialist depth in electrical controls and components.
Frequently Asked Questions
What is the PASS & SEYMOUR Plugtail Duplex Receptacle PT2097HGTRWRW used for?
This hospital-grade GFCI duplex receptacle is designed for commercial and healthcare environments where personnel safety and equipment protection are critical. It provides ground-fault circuit interruption at 125V AC, 20 A, and is commonly installed in patient-care areas, labs, and general-purpose circuits requiring a 5-20R configuration.
What are the specifications of the PASS & SEYMOUR PT2097HGTRWRW?
The PT2097HGTRWRW is a hospital-grade, duplex, 5-20R receptacle rated 125V AC and 20 A. It features GFCI protection, a white finish, and is manufactured by PASS & SEYMOUR. The Plugtail design simplifies wiring in modular systems. The MPN is PT2097HGTRWRW.
Where to buy the PASS & SEYMOUR PT2097HGTRWRW worldwide?
3G Electric supplies the PASS & SEYMOUR PT2097HGTRWRW worldwide. As a global industrial equipment distributor established in 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this hospital-grade GFCI receptacle to any country.
How to install a PASS & SEYMOUR Plugtail GFCI receptacle?
Installation follows standard GFCI receptacle procedures: turn off power, connect line and load wires to the Plugtail connector per the wiring diagram, mount the device in a suitable box, and test using the built-in test/reset buttons. Always verify ground continuity and consult local electrical codes. PASS & SEYMOUR provides generic instructions with the unit.
Used in
Common applications for PASSPASS Products
3G Electric supplies PASS general purpose receptacles. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.