PASS PW-302-W Occupancy Sensor with Dimmer
The PASS & SEYMOUR Wall Switch: Occupancy is an occupancy sensor with dimmer, operating on 120 V AC and 277 V AC. This Passive Infrared (PIR) model covers a maximum area of 1,050 sq ft and is designed for LED…
SKU 3G-OTH-418724
Also listed as: PW302W · PW 302 W
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PASS & SEYMOUR Wall Switch: Occupancy is an occupancy sensor with dimmer, operating on 120 V AC and 277 V AC. This Passive Infrared (PIR) model covers a maximum area of 1,050 sq ft and is designed for LED lighting control. It does not include a neutral wire requirement (.
Frequently Asked Questions
What is the PASS & SEYMOUR PW-302-W occupancy sensor used for?
The PASS & SEYMOUR PW-302-W is a wall switch occupancy sensor with dimmer, designed for automatic lighting control in commercial or residential spaces. It uses Passive Infrared (PIR) technology to detect motion and covers up to 1,050 sq ft, making it suitable for offices, conference rooms, and hallways with LED lighting.
What are the specifications of the PASS & SEYMOUR PW-302-W?
The PASS & SEYMOUR PW-302-W operates on 120 V AC or 277 V AC. It is a Passive Infrared (PIR) occupancy sensor with dimmer, covering a maximum area of 1,050 sq ft. It does not require a neutral wire and lacks a manual-on feature. The manufacturer part number is PW-302-W, and it is designed for LED lighting control.
Where to buy the PASS & SEYMOUR PW-302-W worldwide?
3G Electric supplies the PASS & SEYMOUR PW-302-W occupancy sensor worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this Pass & Seymour model for your project.
How to install the PASS & SEYMOUR PW-302-W occupancy sensor?
Install the PASS & SEYMOUR PW-302-W by first turning off power at the circuit breaker. Connect the line and load wires to the sensor terminals; no neutral wire is needed. Mount the sensor into a standard wall box, restore power, and adjust the dimmer and time-delay settings per the manufacturer's instructions for optimal coverage.
Used in
Common applications for PASSPASS Products
3G Electric supplies PASS occupancy sensors with dimmer. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.