PLASTIC SUPPLY Duct Reducer
The PLASTIC SUPPLY Duct Reducer is a PVC reducer with a 12 in inlet diameter and 11 in outlet diameter, designed for 11 in to 12 in duct diameters. It has an overall length of 9 3/4 in (MPN PVCR12X10).
SKU 3G-OTH-74336
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PLASTIC SUPPLY Duct Reducer is a PVC reducer with a 12 in inlet diameter and 11 in outlet diameter, designed for 11 in to 12 in duct diameters. It has an overall length of 9 3/4 in (MPN PVCR12X10).
Frequently Asked Questions
What is a PVC duct reducer used for?
A PVC duct reducer connects two different-sized duct openings in ventilation or fume-extraction systems. This model transitions from a 12-inch inlet to an 11-inch outlet, maintaining airflow while adapting to existing ductwork. It is commonly used in industrial exhaust, laboratory hoods, and chemical-processing facilities where corrosion-resistant PVC is required.
What are the specifications of the PLASTIC SUPPLY PVCR12X10 duct reducer?
The PLASTIC SUPPLY PVCR12X10 is a PVC duct reducer with a 12-inch inlet diameter and an 11-inch outlet diameter. It has an overall length of 9 3/4 inches and is designed for ducts sized 11 inches to 12 inches. The manufacturer part number is PVCR12X10, and the product type is reducers.
Where to buy the PLASTIC SUPPLY PVCR12X10 duct reducer worldwide?
3G Electric supplies the PLASTIC SUPPLY PVCR12X10 duct reducer worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this PVC reducer to any country.
How to install a PVC duct reducer?
To install a PVC duct reducer, ensure both duct ends are clean and dry. Apply PVC cement to the inside of the larger duct and the outside of the reducer's inlet. Insert the reducer and hold for 30 seconds. For the outlet, repeat with the smaller duct. Allow 24 hours for curing before system startup. Always follow local ventilation codes.
Used in
Common applications for PLASTIC SUPPLYPLASTIC SUPPLY Products
3G Electric supplies PLASTIC SUPPLY reducers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.