POWER FIRST 5-Channel Hinged-Cover Cable Ramp
The POWER FIRST Cable Protector is a 5-channel hinged-cover cable ramp, designed as a straight-section component for managing cables across surfaces. This gray/yellow unit is constructed from polyurethane and…
SKU 3G-OTH-52002
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The POWER FIRST Cable Protector is a 5-channel hinged-cover cable ramp, designed as a straight-section component for managing cables across surfaces. This gray/yellow unit is constructed from polyurethane and accommodates cables up to 1 1/4 inches in maximum diameter, with a width of 16 1/2 inches and a height of 1 5/8 inches.
Frequently Asked Questions
What is the POWER FIRST 5-channel cable protector used for?
The POWER FIRST 5-channel hinged-cover cable ramp is used to route and protect cables across floors, driveways, or event spaces. It accommodates cables up to 1 1/4 inches in diameter and is made from polyurethane for durability. This straight-section component helps prevent tripping hazards and cable damage in industrial or commercial environments.
What are the specifications of the POWER FIRST cable protector GG5X125GRYYPOW2?
The POWER FIRST cable protector model GG5X125GRYYPOW2 has 5 channels, a hinged cover, and a maximum cable diameter of 1 1/4 inches. It measures 16 1/2 inches wide and 1 5/8 inches high. The unit is gray/yellow, made of polyurethane, and is a straight-section cable ramp component.
Where to buy the POWER FIRST cable protector in worldwide?
You can source the POWER FIRST cable protector GG5X125GRYYPOW2 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time; we supply this polyurethane cable ramp for international orders.
How to install a hinged-cover cable ramp like the POWER FIRST model?
To install a hinged-cover cable ramp, lay the ramp flat on a clean, dry surface. Open the hinged cover, place cables into the channels, then close and secure the cover. Ensure the ramp lies flush to avoid tripping. For permanent installations, use adhesive or bolts if recommended. This POWER FIRST polyurethane ramp is designed for straightforward placement.
Used in
Common applications for POWER FIRSTPOWER FIRST Products
3G Electric supplies POWER FIRST 5-channel hinged-cover cable ramps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.