Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
RAYMOND Die Spring - Die Springs
RAYMONDDie Springs

RAYMOND Die Spring

RAYMOND Die Spring (MPN 203205000) is a cylindrical, closed, ground-end die spring made from silicon alloy steel wire. Supplied in a 5-pack, it has a length of 1 17/64 in and an outer diameter of 0.49 in, conforming…

SKU 3G-OTH-745714

Brand
RAYMOND
Item
Die Spring
Part Number
203205000
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. Bank transfer and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
203205000
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End, 5 PK
Material
Silicon Alloy Steel Wire
Lng
1 17/64 in
O.D.
0.49 in
Finish
Chromium
End Type
Closed, Ground
Standards
ISO 10243; NAAMS
Free Length
1-17/64 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
93.6 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Spring Shape
Cylindrical
Inside Diameter
0.25 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Green Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
0.49 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
China (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

RAYMOND Die Spring (MPN 203205000) is a cylindrical, closed, ground-end die spring made from silicon alloy steel wire. Supplied in a 5-pack, it has a length of 1 17/64 in and an outer diameter of 0.49 in, conforming to the ISO-D series.

Frequently Asked Questions

What is a RAYMOND die spring used for?

A RAYMOND die spring is used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action. Its silicon alloy steel construction and closed ground ends ensure consistent performance under high cyclic loads in manufacturing environments.

What are the specifications of the RAYMOND 203205000 die spring?

The RAYMOND 203205000 die spring is made from silicon alloy steel wire, has a cylindrical shape with closed ground ends, a length of 1 17/64 in, an outer diameter of 0.49 in, and is part of the ISO-D series. It is supplied in a 5-pack.

Where to buy RAYMOND die springs worldwide?

3G Electric supplies RAYMOND die springs worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine parts like the 203205000 and deliver them to your facility, ensuring compliance with international shipping requirements.

How to select the correct RAYMOND die spring for your application?

To select the correct RAYMOND die spring, match the outer diameter, length, and series (e.g., ISO-D) to your die's cavity dimensions and required load. Consider the spring's material—silicon alloy steel—for high-stress cycles. Consult your tooling design specifications for proper fit and force.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 17/64 in length with a 0.98 in outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action under cyclic loads
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 17/64 in length with a 0.98 in outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action under cyclic loads
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Suitable for use in stamping dies, metal forming tools, and other press applications requiring controlled force and deflection under cyclic loads. Supplied in a 5-pack
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Suitable for use in stamping dies, metal forming tools, and other press applications requiring controlled force and deflection under cyclic loads. Supplied in a 5-pack
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 47/64 inches in length with a 0.63-inch outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled high-force return action
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 47/64 inches in length with a 0.63-inch outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled high-force return action
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 47/64 inches in length with a 0.49 inch outer diameter. Supplied in a pack of 5. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 47/64 inches in length with a 0.49 inch outer diameter. Supplied in a pack of 5. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 2 1/64 inches in length with a 0.49-inch outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 2 1/64 inches in length with a 0.49-inch outer diameter. Supplied in a 5-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action under high cyclic loads

More from RAYMOND

View all RAYMOND parts →
JIS-series die spring made from alloy steel with a cylindrical shape and closed, ground ends. Measures 1-3/16 in length with a 1.18 in outer diameter. Supplied in a 5-pack. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
RAYMOND
JIS-series die spring made from alloy steel with a cylindrical shape and closed, ground ends. Measures 1-3/16 in length with a 1.18 in outer diameter. Supplied in a 5-pack. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
This die spring is made from silicon alloy steel wire, featuring a cylindrical shape with closed, ground ends. It is part of the ISO-D series and measures 2 63/64 inches in length with an outer diameter of 1.26 inches. Sold as a 3-pack, it is commonly used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to their original position
RAYMOND
This die spring is made from silicon alloy steel wire, featuring a cylindrical shape with closed, ground ends. It is part of the ISO-D series and measures 2 63/64 inches in length with an outer diameter of 1.26 inches. Sold as a 3-pack, it is commonly used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to their original position
Cylindrical die spring with closed, ground ends made from silicon wire. Designed for use in stamping dies, metal forming, and tooling applications requiring controlled force and deflection under high cyclic loads
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon wire. Designed for use in stamping dies, metal forming, and tooling applications requiring controlled force and deflection under high cyclic loads
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications requiring controlled force and return action
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications requiring controlled force and return action
Cylindrical die spring with closed, ground ends. Made from silicon wire. Length of 1 1/4 in. Supplied in a 5-pack. Used in stamping dies, metal forming, and tooling to absorb shock and maintain force
RAYMOND
Cylindrical die spring with closed, ground ends. Made from silicon wire. Length of 1 1/4 in. Supplied in a 5-pack. Used in stamping dies, metal forming, and tooling to absorb shock and maintain force
JIS-series die spring made from silicon wire with cylindrical shape and closed, ground ends. Each pack contains 5 springs, each 2 3/4 inches long. Suitable for high-force return and shock absorption in stamping dies, metal-forming tools, and industrial presses
RAYMOND
JIS-series die spring made from silicon wire with cylindrical shape and closed, ground ends. Each pack contains 5 springs, each 2 3/4 inches long. Suitable for high-force return and shock absorption in stamping dies, metal-forming tools, and industrial presses
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 5 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force in high-cycle applications
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 5 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force in high-cycle applications
This RAYMOND die spring is an ISO-D series, alloy steel spring with a cylindrical shape, closed and ground ends. It measures 5 inches in length and 0.98 inches in outside diameter, sold in a pack of 3. Designed for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
RAYMOND
This RAYMOND die spring is an ISO-D series, alloy steel spring with a cylindrical shape, closed and ground ends. It measures 5 inches in length and 0.98 inches in outside diameter, sold in a pack of 3. Designed for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first