Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
RAYMOND Die Spring, ISO-D Series, Silicon Alloy Steel, 2 63/64 in L, 1.97 in OD - Die Springs
RAYMONDDie Springs

RAYMOND Die Spring, ISO-D Series, Silicon Alloy Steel, 2 63/64 in L, 1.97 in OD

The RAYMOND Die Spring is a cylindrical, closed-ground-end die spring made from silicon alloy steel wire. It is part of the ISO-D series, with a length of 2 63/64 in and an outer diameter of 1.97 in (MPN 203812000).

SKU 3G-OTH-745895

Brand
RAYMOND
Item
Die Spring, ISO-D Series, Silicon Alloy Steel, 2 63/64 in L, 1.97 in OD
Part Number
203812000
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. Bank transfer and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
203812000
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End
Material
Silicon Alloy Steel Wire
Lng
2 63/64 in
O.D
1.97 in
Finish
Chromium
End Type
Closed, Ground
Standards
ISO 10243; NAAMS
Free Length
2-63/64 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
713.8 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Spring Shape
Cylindrical
Inside Diameter
0.98 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Green Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
1.97 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
China (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The RAYMOND Die Spring is a cylindrical, closed-ground-end die spring made from silicon alloy steel wire. It is part of the ISO-D series, with a length of 2 63/64 in and an outer diameter of 1.97 in (MPN 203812000).

Frequently Asked Questions

What is a RAYMOND Die Spring used for?

A RAYMOND Die Spring is used in stamping dies, metal forming tools, and industrial presses to provide controlled, high-force return action. Its silicon alloy steel construction and closed-ground ends deliver consistent performance under repeated heavy loads in automotive, aerospace, and general manufacturing applications.

What are the specifications of the RAYMOND Die Spring MPN 203812000?

The RAYMOND Die Spring MPN 203812000 is a cylindrical, closed-ground-end spring from the ISO-D series. It is made of silicon alloy steel wire, measures 2 63/64 in length with a 1.97 in outer diameter, and is designed for high-stress die applications requiring reliable, repeatable force.

Where to buy RAYMOND Die Springs worldwide?

3G Electric supplies RAYMOND Die Springs worldwide, handling full logistics and customs clearance for international orders. As a global industrial sourcing partner, we provide genuine RAYMOND parts like the ISO-D series spring MPN 203812000 to customers across 14 industrial departments, including metalworking and tooling.

How to select the correct RAYMOND Die Spring for a die set?

To select the correct RAYMOND Die Spring, match the required load, deflection, and cavity dimensions. For the ISO-D series, verify the outer diameter (1.97 in) and length (2 63/64 in) fit your die pocket. Consult the manufacturer's load-deflection chart for your application's force needs to ensure proper spring life and performance.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

More from RAYMOND

View all RAYMOND parts →
This RAYMOND die spring is made from silicon alloy steel wire in the ISO-D series. It has a cylindrical shape with closed, ground ends, a length of 1 47/64 in, and an outer diameter of 0.98 in. The 5-pack is used in stamping dies, metal forming, and press tooling to provide controlled force and return action
RAYMOND
This RAYMOND die spring is made from silicon alloy steel wire in the ISO-D series. It has a cylindrical shape with closed, ground ends, a length of 1 47/64 in, and an outer diameter of 0.98 in. The 5-pack is used in stamping dies, metal forming, and press tooling to provide controlled force and return action
JIS-series cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 31/32 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force in high-cycle press operations
RAYMOND
JIS-series cylindrical die spring made from silicon wire with closed, ground ends. Each spring measures 1 31/32 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and industrial tooling to absorb shock and maintain consistent force in high-cycle press operations
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Part of the ISO-D series, it measures 2 1/64 inches in length and 1.26 inches in outer diameter. Supplied in a pack of 5. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Part of the ISO-D series, it measures 2 1/64 inches in length and 1.26 inches in outer diameter. Supplied in a pack of 5. Used in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads
Cylindrical die spring made from silicon alloy steel wire with closed and ground ends. Measures 4 17/32 inches in length with a 0.79 inch outer diameter. Supplied in a pack of 5. Suitable for use in stamping dies, metal forming, and press tooling to absorb shock and return components to position
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed and ground ends. Measures 4 17/32 inches in length with a 0.79 inch outer diameter. Supplied in a pack of 5. Suitable for use in stamping dies, metal forming, and press tooling to absorb shock and return components to position
JIS-series die spring made from silicon wire with a cylindrical shape and closed, ground ends. Each spring measures 1 49/64 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
RAYMOND
JIS-series die spring made from silicon wire with a cylindrical shape and closed, ground ends. Each spring measures 1 49/64 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and tooling applications to provide controlled force and return action
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 1/2 inches in length with a 0.63-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads. Supplied in a 5-pack
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 1 1/2 inches in length with a 0.63-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads. Supplied in a 5-pack
Cylindrical die spring made from silicon alloy steel wire, featuring closed and ground ends. Suitable for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads. Supplied as a pack of 3 springs
RAYMOND
Cylindrical die spring made from silicon alloy steel wire, featuring closed and ground ends. Suitable for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads. Supplied as a pack of 3 springs
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first