Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
RAYMOND ISO-D Die Spring - Die Springs
RAYMONDDie Springs

RAYMOND ISO-D Die Spring

The RAYMOND Die Spring (MPN 302514D) is an ISO-D series, alloy steel die spring with a cylindrical shape, closed and ground ends, measuring 3 1/2 inches in length, sold in a pack of 10.

SKU 3G-OTH-745868

Also listed as: 302514 D · 302514-D

Brand
RAYMOND
Item
ISO-D Die Spring
Part Number
302514D
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. Bank transfer and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
302514D
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End, 10 PK
Material
Alloy Steel; Silicon Wire
Lng
3 1/2 in
Finish
Chromium
UNSPSC
31161905
End Type
Closed, Ground
Standards
ASTM A877
Free Length
3-1/2 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
86.8 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Spring Shape
Cylindrical
Inside Diameter
0.5 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Light Green Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
0.98 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
Varies (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The RAYMOND Die Spring (MPN 302514D) is an ISO-D series, alloy steel die spring with a cylindrical shape, closed and ground ends, measuring 3 1/2 inches in length, sold in a pack of 10.

Frequently Asked Questions

What is a RAYMOND die spring used for?

A RAYMOND die spring is used in stamping dies, metal forming, and press tooling to provide controlled force and return action. The ISO-D series alloy steel design with closed, ground ends ensures consistent performance in high-cycle industrial applications.

What are the specifications of the RAYMOND 302514D die spring?

The RAYMOND 302514D is an ISO-D series die spring made of alloy steel, cylindrical with closed and ground ends, 3 1/2 inches long, sold in a pack of 10. It is designed for reliable force in stamping and forming operations.

Where to buy RAYMOND die springs worldwide?

3G Electric supplies RAYMOND die springs worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine parts like the 302514D across 14 departments, including specialist expertise in combustion, pumps, and controls.

How to select the right RAYMOND die spring for a stamping die?

Select a RAYMOND die spring based on required load, deflection, and space constraints. The ISO-D series alloy steel spring with closed, ground ends suits high-cycle dies. Match length and diameter to your tool design; consult a technical resource for force ratings.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

More from RAYMOND

View all RAYMOND parts →
Cylindrical die spring made from silicon alloy steel wire, featuring closed and ground ends. Suitable for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads. Supplied as a pack of 3 springs
RAYMOND
Cylindrical die spring made from silicon alloy steel wire, featuring closed and ground ends. Suitable for use in stamping dies, metal forming tools, and industrial presses to provide controlled force and return action under high cyclic loads. Supplied as a pack of 3 springs
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.97-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling applications
Cylindrical die spring with closed, ground ends. Made from silicon alloy steel wire. Length 3 1/2 in, outer diameter 1.58 in. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to position
RAYMOND
Cylindrical die spring with closed, ground ends. Made from silicon alloy steel wire. Length 3 1/2 in, outer diameter 1.58 in. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and return components to position
Cylindrical die spring with closed, ground ends, made from silicon wire. Part of the ISO-D series, it measures 2 33/64 inches in length and is supplied in a pack of 15. Used in stamping and forming dies to absorb shock and control motion in high-cycle industrial tooling applications
RAYMOND
Cylindrical die spring with closed, ground ends, made from silicon wire. Part of the ISO-D series, it measures 2 33/64 inches in length and is supplied in a pack of 15. Used in stamping and forming dies to absorb shock and control motion in high-cycle industrial tooling applications
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 2-1/2 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring made from alloy steel with closed and ground ends. Measures 2-1/2 inches in length. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 3 1/2 inches in length with a 1.97-inch outer diameter. Suitable for stamping dies, metal forming, and tooling applications requiring controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 3 1/2 inches in length with a 1.97-inch outer diameter. Suitable for stamping dies, metal forming, and tooling applications requiring controlled force and return action under high cyclic loads
Cylindrical die spring with closed and ground ends, made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
Cylindrical die spring with closed and ground ends, made from silicon alloy steel wire. Measures 12 1/64 inches in length with a 1.26-inch outer diameter. Suitable for use in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Length of 63/64 in. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads
RAYMOND
JIS-series die spring made of alloy steel with a cylindrical shape and closed, ground ends. Length of 63/64 in. Supplied in a 10-pack. Used in stamping dies, metal forming, and press tooling to provide controlled force and return action under high cyclic loads

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first