Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
RAYMOND ISO-D Die Spring - Die Springs
RAYMONDDie Springs

RAYMOND ISO-D Die Spring

RAYMOND Die Spring (MPN 303208D) is a cylindrical-shape, closed, ground-end spring from the ISO-D series, made of silicon wire. Supplied in a 15-pack with a length of 2 1/64 inches, this product is a die spring for…

SKU 3G-OTH-745859

Also listed as: 303208 D · 303208-D

Brand
RAYMOND
Item
ISO-D Die Spring
Part Number
303208D
Category
Die Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. Bank transfer and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

RAYMOND
Manufacturer Part Number
303208D
Series
ISO-D
Type
Cylindrical Shape, Closed, Ground End, 15 PK
Material
Alloy Steel; Silicon Wire
Lng
2 1/64 in
Finish
Chromium
End Type
Closed, Ground
Standards
ASTM A877
Free Length
2-1/64 in Free Length This refers to the entire spring length when no force is acting on it.
Spring Rate
53 lb/in Spring Rate This refers to how much the spring moves when pulled by a known load or force.
Catalog Page
N/A
Product Type
Die Spring
Solid Height
1.51 in
Spring Shape
Cylindrical
Inside Diameter
0.28 in Inside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Die Spring Color
Green Die Spring Color This refers to the specific colors that indicate the performance duty rating of the spring, which may vary by spring series.
Outside Diameter
0.5 in Outside Diameter These measurement values apply only to cylindrical compression springs and die springs.
Country of Origin
Japan (subject to change)
System of Measurement
Inch

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

RAYMOND Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

RAYMOND Die Spring (MPN 303208D) is a cylindrical-shape, closed, ground-end spring from the ISO-D series, made of silicon wire. Supplied in a 15-pack with a length of 2 1/64 inches, this product is a die spring for industrial tooling applications.

Frequently Asked Questions

What is a RAYMOND die spring used for?

RAYMOND die springs, like the ISO-D series model 303208D, are used in industrial tooling and stamping dies to absorb shock, control motion, and return components to their original position. They are essential in metal forming, press operations, and injection molding applications.

What are the specifications of the RAYMOND 303208D die spring?

The RAYMOND 303208D is a cylindrical, closed, ground-end die spring from the ISO-D series. It is made of silicon wire, measures 2 1/64 inches in length, and is supplied in a 15-pack. This spring is designed for high-stress tooling applications.

Where to buy RAYMOND die springs worldwide?

3G Electric supplies RAYMOND die springs, including the 303208D, to customers worldwide. We handle full logistics and customs clearance to deliver industrial tooling components to your facility. Contact us for a quote and delivery options for your region.

How to select the right RAYMOND die spring for my application?

To select the correct RAYMOND die spring, consider the required load, deflection, and operating environment. The ISO-D series offers a balance of strength and fatigue life. Match the spring's length, diameter, and material (silicon wire) to your die's space and force requirements.

Not sure this is the right part? Photo-identify it→

RAYMOND Products

3G Electric supplies RAYMOND die springs. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

More from RAYMOND

View all RAYMOND parts →
This die spring is made from alloy steel with a cylindrical shape and closed, ground ends. It is part of the ISO-D series and measures 2 63/64 inches in length. Sold in a pack of three, it is suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action
RAYMOND
This die spring is made from alloy steel with a cylindrical shape and closed, ground ends. It is part of the ISO-D series and measures 2 63/64 inches in length. Sold in a pack of three, it is suitable for use in stamping dies, metal forming tools, and industrial presses requiring controlled force and return action
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Length 2 63/64 in, outer diameter 1.97 in, ISO-D series. Used in stamping dies, metal forming, and press tooling to absorb shock and return components
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Length 2 63/64 in, outer diameter 1.97 in, ISO-D series. Used in stamping dies, metal forming, and press tooling to absorb shock and return components
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 7 1/64 in length with a 1.97 in outer diameter. Classified under the ISO-D series for medium-duty deflection. Used in stamping dies, metal forming, and press tooling to absorb shock and maintain consistent force
RAYMOND
Cylindrical die spring with closed, ground ends made from silicon alloy steel wire. Measures 7 1/64 in length with a 1.97 in outer diameter. Classified under the ISO-D series for medium-duty deflection. Used in stamping dies, metal forming, and press tooling to absorb shock and maintain consistent force
This RAYMOND die spring is a cylindrical, closed, ground-end spring made from alloy steel. It measures 12 inches in length with a 0.63-inch outer diameter. Designed for use in stamping dies, metal forming, and tooling applications, it provides controlled force and return action in high-cycle industrial environments
RAYMOND
This RAYMOND die spring is a cylindrical, closed, ground-end spring made from alloy steel. It measures 12 inches in length with a 0.63-inch outer diameter. Designed for use in stamping dies, metal forming, and tooling applications, it provides controlled force and return action in high-cycle industrial environments
JIS-series die spring made from silicon wire. Cylindrical shape with closed, ground ends. Each pack contains 5 springs, each 3 15/16 inches long. Used in stamping dies, metal forming, and press tooling for shock absorption and consistent force
RAYMOND
JIS-series die spring made from silicon wire. Cylindrical shape with closed, ground ends. Each pack contains 5 springs, each 3 15/16 inches long. Used in stamping dies, metal forming, and press tooling for shock absorption and consistent force
JIS-series die spring made of alloy steel with a cylindrical shape, closed and ground ends. Each spring measures 1 49/64 in in length, supplied in packs of 10. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and maintain consistent force
RAYMOND
JIS-series die spring made of alloy steel with a cylindrical shape, closed and ground ends. Each spring measures 1 49/64 in in length, supplied in packs of 10. Used in stamping dies, metal forming tools, and industrial presses to absorb shock and maintain consistent force
Alloy steel die spring with cylindrical shape, closed and ground ends. Measures 5 inches in length with 1.25-inch outer diameter. Sold in a pack of 2. Suitable for industrial tool and die applications requiring consistent spring force
RAYMOND
Alloy steel die spring with cylindrical shape, closed and ground ends. Measures 5 inches in length with 1.25-inch outer diameter. Sold in a pack of 2. Suitable for industrial tool and die applications requiring consistent spring force
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 3 1/2 inches in length with a 1.26-inch outer diameter. Supplied in a 3-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses where controlled force and return action are required under high cyclic loads
RAYMOND
Cylindrical die spring made from silicon alloy steel wire with closed, ground ends. Measures 3 1/2 inches in length with a 1.26-inch outer diameter. Supplied in a 3-pack. Suitable for use in stamping dies, metal forming tools, and industrial presses where controlled force and return action are required under high cyclic loads

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first