RIDGID Inductive Signal Clamp, Gray, 2.5 ft Cable, 8-262 kHz, MPN 72963
The RIDGID Inductive Signal Clamp (MPN 72963) is a gray signal clamp designed for use with an underground cable and utility line locator transmitter. It operates at a frequency range of 8 to 262 kHz and is compatible…
SKU 3G-OTH-171595
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The RIDGID Inductive Signal Clamp (MPN 72963) is a gray signal clamp designed for use with an underground cable and utility line locator transmitter. It operates at a frequency range of 8 to 262 kHz and is compatible with the SR-24 model. The clamp features a 2.5 ft cable length.
Frequently Asked Questions
What is the RIDGID Inductive Signal Clamp used for?
The RIDGID Inductive Signal Clamp is used to apply a trace signal to underground cables and utility lines for locating. It clamps around a conductor and induces a signal from a compatible locator transmitter, enabling precise detection of buried pipes and cables without direct connection.
What are the specifications of the RIDGID Inductive Signal Clamp?
The RIDGID Inductive Signal Clamp (MPN 72963) is gray, has a 2.5 ft cable length, and operates at 8 to 262 kHz. It is designed for use with an underground cable and utility line locator transmitter and is compatible with the RIDGID SR-24 model.
Where to buy the RIDGID Inductive Signal Clamp worldwide?
You can source the RIDGID Inductive Signal Clamp through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this RIDGID signal clamp.
How to install the RIDGID Inductive Signal Clamp?
To install the RIDGID Inductive Signal Clamp, open the clamp and place it around the target cable or pipe. Connect the clamp's cable to the transmitter output. Ensure the clamp jaws fully close for proper signal coupling. Follow the transmitter's operating instructions for frequency selection and grounding.
Used in
Common applications for RIDGIDRIDGID Products
3G Electric supplies RIDGID signal clamps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- MURRELEKTRONIK Single-ended cordset with a gray PUR jacket for twisting applications. Features an M12 female straight connector on one end and bare wire on the other, with 5 pins, 22 AWG wire size, and 1 m cable length. Rated IP66K, supports a maximum current of 4 A. Suitable for connecting sensors or actuators in industrial automation, particularly in environments requiring resistance to oils and abrasion
- MURRELEKTRONIK Single-ended cordset with a right-angle M12 female connector and bare wire termination. Features a gray PUR jacket suitable for twisting applications. 3 pins, 22 AWG, 5 m cable length, rated 4 A, IP66K. Used for connecting sensors or actuators in industrial automation
- MURRELEKTRONIK Single-ended cordset with M12 female straight connector on one end and bare wire on the other. Features 8 pins, 24 AWG wire, gray PUR jacket, and IP66K rating. Supports up to 3 A. Suitable for connecting sensors or actuators in industrial automation, particularly in twisting applications
- MURRELEKTRONIK Single-ended cordset with a status LED, featuring an M12 female right-angle connector on one end and bare wire on the other. The gray PVC jacket and 22 AWG conductors support flexing applications in industrial environments. Rated IP66K, with 4 pins and a 1 m cable length, it is suitable for connecting sensors or actuators in automation systems
- MURRELEKTRONIK Single-ended cordset with status LED, featuring an M12 female right-angle connector on one end and bare wire on the other. The gray PVC jacket and IP65 rating make it suitable for flexing applications in industrial environments. Cable length is 10 m, with 3 pins, 22 AWG wire, and a maximum current of 4 A
- MURRELEKTRONIK Single-ended cordset with status LED and PUR jacket for twisting applications. Features an M12 female right-angle connector on one end and bare wire on the other. 3 pins, 22 AWG wire size, gray PUR cable jacket, 10 m length. Rated IP67, supports up to 4 A. Suitable for connecting sensors or actuators in industrial environments