RULAND MANUFACTURING Double Disc Coupling
The RULAND MANUFACTURING Disc Coupling (MPN DCD50-28-28-A) is a double disc coupling for round shafts with a 1 3/4 in x 1 3/4 in bore diameter and a 3 1/8 in OD. It features a clamp-on design, an aluminum hub and…
SKU 3G-OTH-145377
Also listed as: DCD502828A · DCD50 28 28 A
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The RULAND MANUFACTURING Disc Coupling (MPN DCD50-28-28-A) is a double disc coupling for round shafts with a 1 3/4 in x 1 3/4 in bore diameter and a 3 1/8 in OD. It features a clamp-on design, an aluminum hub and center spacer, and stainless steel discs. This coupling has 2 discs with a center spacer and is designed for same bore dimensions in inch sizes.
Frequently Asked Questions
What is a RULAND MANUFACTURING disc coupling used for?
A RULAND MANUFACTURING disc coupling connects two round shafts in motion-control systems, compensating for misalignment while transmitting torque. It is commonly used in servo motors, encoders, and precision positioning equipment where zero backlash and high torsional stiffness are required.
What are the specifications of the RULAND DCD50-28-28-A disc coupling?
The RULAND DCD50-28-28-A is a double disc coupling with a 1 3/4 in bore diameter, 3 1/8 in OD, and clamp-on round design. It has an aluminum hub and center spacer with stainless steel discs, rated for inch-size shafts with same bore dimensions.
Where to buy a RULAND disc coupling worldwide?
3G Electric supplies the RULAND DCD50-28-28-A disc coupling to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote and lead time on this precision coupling.
How to install a RULAND clamp-on disc coupling?
To install a RULAND clamp-on disc coupling, clean both shaft ends and the bore. Loosen the clamp screws, slide the coupling onto the shafts, align the equipment, then tighten the screws evenly to the manufacturer's torque specification. Avoid over-tightening to prevent disc damage.
Used in
Common applications for RULAND MANUFACTURINGRULAND MANUFACTURING Products
3G Electric supplies RULAND MANUFACTURING double disc couplings for round shafts. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
