RULAND MANUFACTURING Short Clamp-On Slit Coupling, 10 mm Bore, 20 mm OD
The RULAND MANUFACTURING MRSC20-10-10-A is a short clamp-on slit coupling with 10 mm bore diameters for both ends and a 20 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND…
SKU 3G-OTH-142020
Also listed as: MRSC201010A · MRSC20 10 10 A
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The RULAND MANUFACTURING MRSC20-10-10-A is a short clamp-on slit coupling with 10 mm bore diameters for both ends and a 20 mm coupling outside diameter. This product is a short clamp-on slit coupling from RULAND MANUFACTURING.
Frequently Asked Questions
What is a RULAND MANUFACTURING slit coupling used for?
A RULAND MANUFACTURING slit coupling, such as the MRSC20-10-10-A, is used to connect two shafts in motion-control systems while compensating for minor misalignment. It is common in servo motors, encoders, and linear actuators where zero backlash and torsional rigidity are required.
What are the specifications of the RULAND MANUFACTURING MRSC20-10-10-A slit coupling?
The MRSC20-10-10-A is a short clamp-on slit coupling with 10 mm bore diameter on both ends and a 20 mm coupling outside diameter. It is manufactured by RULAND MANUFACTURING and designed for precision motion-control applications requiring a compact, zero-backlash connection.
Where to buy RULAND MANUFACTURING slit couplings worldwide?
You can source RULAND MANUFACTURING slit couplings, including the MRSC20-10-10-A, through 3G Electric. We handle full logistics, customs clearance, and delivery to worldwide destinations as a global industrial equipment distributor established in 1990.
How to install a RULAND MANUFACTURING clamp-on slit coupling?
To install a RULAND MANUFACTURING clamp-on slit coupling, clean both shaft ends and the bore. Loosen the clamp screws, slide the coupling onto the shafts, align the components, then tighten the screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent shaft damage.
Used in
Common applications for RULAND MANUFACTURINGRULAND MANUFACTURING Products
3G Electric supplies RULAND MANUFACTURING short clamp-on slit couplings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
