RULAND MANUFACTURING Long Clamp-On Slit Coupling
The RULAND MANUFACTURING RLC13-4-4-A is a long clamp-on slit coupling with 1/4 in bore diameters and a 1 1/32 in overall length, designed for inch-sized shafts. As a slit coupling, it provides zero-backlash motion…
SKU 3G-OTH-151404
Also listed as: RLC1344A · RLC13 4 4 A
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The RULAND MANUFACTURING RLC13-4-4-A is a long clamp-on slit coupling with 1/4 in bore diameters and a 1 1/32 in overall length, designed for inch-sized shafts. As a slit coupling, it provides zero-backlash motion control and accommodates parallel misalignment. 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments, with specialist depth in motion control and power transmission.
Frequently Asked Questions
What is a RULAND MANUFACTURING slit coupling used for?
A RULAND MANUFACTURING slit coupling, such as the RLC13-4-4-A, is used to connect two shafts in motion-control applications. It compensates for minor misalignment while transmitting torque smoothly. Common uses include encoders, stepper motors, and linear actuators in automation and packaging equipment.
What are the specifications of the RULAND RLC13-4-4-A slit coupling?
The RULAND RLC13-4-4-A is a long clamp-on slit coupling with a 1/4 in bore diameter on both ends and an overall length of 1 1/32 in. It is an inch-series coupling designed for precise shaft connections. The part number is RLC13-4-4-A, and it is manufactured by RULAND MANUFACTURING.
Where to buy RULAND MANUFACTURING couplings in worldwide?
You can source RULAND MANUFACTURING couplings, including the RLC13-4-4-A, through 3G Electric. As a global industrial distributor, 3G Electric handles full logistics, customs clearance, and delivery to worldwide locations. Contact 3G Electric for availability and lead time on this coupling.
How to install a RULAND clamp-on slit coupling?
To install a RULAND clamp-on slit coupling, first ensure both shaft ends are clean and free of burrs. Slide the coupling onto the shafts, align the bores, then tighten the clamp screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent distortion. Always verify shaft alignment after installation.
Used in
Common applications for RULAND MANUFACTURINGRULAND MANUFACTURING Products
3G Electric supplies RULAND MANUFACTURING long clamp-on slit couplings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.