SCHNEIDER Terminal Block: DIN Rail Mounting Type, Push-In Wire Termination, 4 Wire Terminals
The SCHNEIDER NSYTRP24 is a DIN rail mounting pass-through terminal block with push-in wire termination and four wire terminals. It is rated for 20 A and accepts a minimum wire size of 24 AWG.
SKU 3G-OTH-18716
Also listed as: NSYTRP 24 · NSYTRP-24
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The SCHNEIDER NSYTRP24 is a DIN rail mounting pass-through terminal block with push-in wire termination and four wire terminals. It is rated for 20 A and accepts a minimum wire size of 24 AWG.
Frequently Asked Questions
What is the SCHNEIDER NSYTRP24 terminal block used for?
The SCHNEIDER NSYTRP24 is a DIN rail mounting pass-through terminal block used to connect and distribute electrical wires in control panels, industrial automation, and building management systems. Its push-in termination and 20 A rating make it suitable for low-power signal and power distribution in factory and process environments.
What are the specifications of the SCHNEIDER NSYTRP24 terminal block?
The SCHNEIDER NSYTRP24 is a pass-through terminal block with DIN rail mounting, push-in wire termination, and four wire terminals. It is rated for 20 A and accepts a minimum wire size of 24 AWG. The manufacturer part number is NSYTRP24.
Where to buy the SCHNEIDER NSYTRP24 terminal block worldwide?
3G Electric supplies the SCHNEIDER NSYTRP24 terminal block worldwide. As a global industrial equipment distributor established in 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this SCHNEIDER pass-through block.
How to install the SCHNEIDER NSYTRP24 terminal block on a DIN rail?
To install the SCHNEIDER NSYTRP24, snap it onto a standard 35 mm DIN rail until it locks in place. Strip wires to the recommended length, then insert each conductor into the push-in termination port until it seats. Use a screwdriver to press the release button if removal is needed. Always follow local electrical codes.
Used in
Common applications for SCHNEIDERSCHNEIDER Products
3G Electric supplies SCHNEIDER pass-through blocks. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
