SEALMASTER Insert Bearing: ER-16, 1 in Bore, 2 3/64 in OD, 0.75 in Outer Ring Wd, Set Screws
The SEALMASTER ER-16 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 1-inch bore, a 2 3/64-inch outer diameter, and a 0.75-inch outer…
SKU 3G-OTH-98762
Also listed as: ER16 · ER 16
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-16 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 1-inch bore, a 2 3/64-inch outer diameter, and a 0.75-inch outer ring width, secured with set screws. This inch-system bearing is identified by the industry number ER-16.
Frequently Asked Questions
What is a SEALMASTER ER-16 insert bearing used for?
The SEALMASTER ER-16 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design handles moderate radial and axial loads, making it suitable for conveyors, fans, and agricultural machinery where a 1-inch shaft is required.
What are the specifications of the SEALMASTER ER-16 bearing?
The SEALMASTER ER-16 is an inch-system radial/deep groove ball insert bearing with a 1-inch bore, 2 3/64-inch outer diameter, and 0.75-inch outer ring width. It features double-sealed closure and set-screw locking. The industry number is ER-16, and the manufacturer part number is ER-16.
Where to buy SEALMASTER ER-16 bearings worldwide?
You can source the SEALMASTER ER-16 bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine SEALMASTER components for your application.
How to install a SEALMASTER ER-16 insert bearing?
To install the SEALMASTER ER-16, first ensure the shaft is clean and within tolerance for the 1-inch bore. Slide the bearing onto the shaft, then tighten the set screws evenly to secure it. Avoid over-tightening to prevent distortion. Use a retaining ring on the outer diameter if required by the housing design.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
