SEALMASTER Insert Bearing: ER-19, 1 3/16 in Bore, 2 7/16 in OD, 0.875 in Outer Ring Wd
The SEALMASTER ER-19 is a retaining-ring cylindrical insert bearing, a radial/deep groove ball bearing type with double-sealed closure. It has a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width, secured by…
SKU 3G-OTH-99019
Also listed as: ER19 · ER 19
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-19 is a retaining-ring cylindrical insert bearing, a radial/deep groove ball bearing type with double-sealed closure. It has a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width, secured by set screws. This inch-system bearing is identified by industry number ER-19.
Frequently Asked Questions
What is the SEALMASTER ER-19 insert bearing used for?
The SEALMASTER ER-19 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design supports moderate radial and axial loads in conveyors, fans, and agricultural machinery. The double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the SEALMASTER ER-19 bearing?
The SEALMASTER ER-19 has a 1 3/16 in bore, 2 7/16 in OD, and 0.875 in outer ring width. It is a radial/deep groove ball bearing with double-sealed closure and set-screw locking. This inch-system bearing carries industry number ER-19 and manufacturer part number ER-19.
Where to buy SEALMASTER ER-19 bearings worldwide?
3G Electric supplies the SEALMASTER ER-19 bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver genuine SEALMASTER components to any international destination.
How to install a SEALMASTER ER-19 insert bearing?
To install the SEALMASTER ER-19, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly to secure it. Ensure the retaining ring is properly seated in the housing groove. Use a torque wrench to manufacturer-recommended values. Lubricate per SEALMASTER guidelines before operation.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
