SEALMASTER ER-46 Retaining-Ring Cylindrical Insert Bearing
The SEALMASTER ER-46 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 2 7/8 in, an OD of 5 7/64 in, and an outer ring width of 1.5 in. It features…
SKU 3G-OTH-100525
Also listed as: ER46 · ER 46
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-46 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 2 7/8 in, an OD of 5 7/64 in, and an outer ring width of 1.5 in. It features double-sealed closure and set-screw locking. This bearing is identified by the industry number ER-46 and manufacturer part number ER-46.
Frequently Asked Questions
What is a SEALMASTER ER-46 insert bearing used for?
The SEALMASTER ER-46 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the SEALMASTER ER-46 bearing?
The SEALMASTER ER-46 has a 2 7/8 in bore, 5 7/64 in OD, and 1.5 in outer ring width. It is an inch-system radial/deep groove ball bearing with double-sealed closure and set-screw locking. The manufacturer part number and bearing industry number are both ER-46.
Where to buy SEALMASTER ER-46 bearings worldwide?
3G Electric supplies the SEALMASTER ER-46 bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this retaining-ring cylindrical insert bearing to your facility, regardless of location.
How to install a SEALMASTER ER-46 insert bearing?
To install the SEALMASTER ER-46, first ensure the shaft is clean and within tolerance for the 2 7/8 in bore. Slide the bearing onto the shaft, then tighten the set screws evenly to lock it in place. Use a retaining ring on the outer ring if required by the housing design.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
