SKF HMS4 Single-Lip Oil Seal with Rubber-Enclosed Case for Rough Bores
The SKF Rotary Shaft Seal is a single-lip oil seal with a rubber-enclosed case for rough bores, featuring an HMS4 seal design. This inch-system seal has a 1.732 in ID, 2.32 in OD, and 0.26 in width, with a nitrile…
SKU 3G-OTH-124901
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The SKF Rotary Shaft Seal is a single-lip oil seal with a rubber-enclosed case for rough bores, featuring an HMS4 seal design. This inch-system seal has a 1.732 in ID, 2.32 in OD, and 0.26 in width, with a nitrile lip material and an integral spring (MPN 17134). It is designed for use as a rotary shaft seal in industrial equipment.
Frequently Asked Questions
What is the SKF Rotary Shaft Seal 17134 used for?
The SKF Rotary Shaft Seal 17134 is a single-lip oil seal with a rubber-enclosed case designed for rough bores. It seals rotating shafts in industrial equipment such as gearboxes, pumps, and motors, preventing lubricant leakage and contaminant ingress. The nitrile lip and integral spring ensure reliable sealing in moderate-duty applications.
What are the specifications of the SKF Rotary Shaft Seal 17134?
The SKF Rotary Shaft Seal 17134 has an ID of 1.732 in, OD of 2.32 in, and width of 0.26 in. It features an HMS4 seal design with a nitrile lip material and an integral spring. This inch-system seal is manufactured by SKF under MPN 17134 and is classified as a single-lip oil seal with a rubber-enclosed case for rough bores.
Where to buy the SKF Rotary Shaft Seal 17134 worldwide?
You can source the SKF Rotary Shaft Seal 17134 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine SKF seals for industrial applications.
How to install the SKF Rotary Shaft Seal 17134?
To install the SKF Rotary Shaft Seal 17134, ensure the bore is clean and free of burrs. Use a seal driver or press to apply even pressure on the outer case, avoiding damage to the nitrile lip. Lubricate the lip and shaft before installation. Do not use sharp tools; follow SKF's generic best practices for seal mounting.
Used in
Common applications for SKFSKF Products
3G Electric supplies SKF single-lip oil seals with rubber-enclosed cases for rough bores. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
