SOLBERG SLCR-150 Regenerative Blower Silencer
The SOLBERG SLCR-150 is a regenerative blower silencer (muffler) with a 2.6-inch outside diameter and screw-on connection. It is designed for use with the VFC400A-7W blower. This product is manufactured by SOLBERG.
SKU 3G-OTH-191064
Also listed as: SLCR150 · SLCR 150
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The SOLBERG SLCR-150 is a regenerative blower silencer (muffler) with a 2.6-inch outside diameter and screw-on connection. It is designed for use with the VFC400A-7W blower. This product is manufactured by SOLBERG.
Frequently Asked Questions
What is the SOLBERG SLCR-150 regenerative blower silencer used for?
The SOLBERG SLCR-150 is a muffler designed to reduce noise from regenerative blowers, specifically the VFC400A-7W model. It is commonly used in industrial vacuum and pressure systems where quiet operation is required. The screw-on connection and 2.6-inch outside diameter allow direct mounting to the blower inlet or outlet.
What are the specifications of the SOLBERG SLCR-150 silencer?
The SOLBERG SLCR-150 has a 2.6-inch outside diameter and a screw-on connection. Its manufacturer part number is SLCR-150, and it is designed for use with the VFC400A-7W regenerative blower. This silencer is manufactured by SOLBERG and is intended for noise attenuation in blower systems.
Where to buy the SOLBERG SLCR-150 silencer worldwide?
3G Electric supplies the SOLBERG SLCR-150 regenerative blower silencer worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this SOLBERG muffler to any country.
How to install the SOLBERG SLCR-150 silencer on a blower?
To install the SOLBERG SLCR-150, screw it directly onto the inlet or outlet port of the VFC400A-7W regenerative blower. Ensure the threads are clean and apply thread sealant if needed to prevent leaks. Tighten by hand or with a strap wrench; avoid over-tightening. Verify the silencer is securely mounted before operating the blower.
Used in
Common applications for SOLBERGSOLBERG Products
3G Electric supplies SOLBERG mufflers for regenerative blowers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.