STREAMLINE 1 in Type M Copper Tubing, 5 ft Straight Section
STREAMLINE Low-Pressure Type M Copper Tubing for Plumbing (MPN MH10005) is a 5 ft straight section of 1 in Type M copper tubing with a maximum operating pressure of 270 psi @ 200°F. This product is not cleaned and…
SKU 3G-OTH-743540
Also listed as: MH 10005 · MH-10005
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
STREAMLINE Low-Pressure Type M Copper Tubing for Plumbing (MPN MH10005) is a 5 ft straight section of 1 in Type M copper tubing with a maximum operating pressure of 270 psi @ 200°F. This product is not cleaned and capped.
Frequently Asked Questions
What is STREAMLINE Type M copper tubing used for?
STREAMLINE Type M copper tubing is used for low-pressure plumbing applications such as residential and commercial water supply lines, drain lines, and HVAC refrigerant piping. Its 1 in diameter and 270 psi @ 200°F rating suit general plumbing systems where cleaned and capped ends are not required.
What are the specifications of STREAMLINE 1 in copper tubing?
The STREAMLINE MH10005 is a 5 ft straight section of 1 in Type M copper tubing. It has a maximum operating pressure of 270 psi @ 200°F, is made of copper, and is not cleaned and capped. Type M has a thinner wall than Type L, making it suitable for lower-pressure plumbing applications.
Where to buy STREAMLINE copper tubing in worldwide?
3G Electric supplies STREAMLINE copper tubing worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the MH10005 or any STREAMLINE plumbing product for reliable sourcing and support.
How to install STREAMLINE Type M copper tubing?
Install STREAMLINE Type M copper tubing using standard soldering or compression fittings. Cut tubing square, deburr inside and out, apply flux, and heat evenly before applying solder. For sweated joints, ensure surfaces are clean. Support tubing every 6 ft to prevent sagging. Always follow local plumbing codes.
Used in
Common applications for STREAMLINESTREAMLINE Products
3G Electric supplies STREAMLINE low-pressure type m copper tubing for plumbing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.