T&S BRASS Disc Faucet Cartridge for B-2710 and B-2711 Single Lever Faucets
The T&S BRASS Disc Faucet Cartridge (SKU 013111-45, MPN 013111-45) is a brass cartridge designed for use with T&S Brass B-2710 and B-2711 single lever faucets. It includes a cartridge O-ring and has an overall length…
SKU 3G-OTH-428036
Also listed as: 01311145 · 013111 45
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The T&S BRASS Disc Faucet Cartridge (SKU 013111-45, MPN 013111-45) is a brass cartridge designed for use with T&S Brass B-2710 and B-2711 single lever faucets. It includes a cartridge O-ring and has an overall length of 3 1/8 inches.
Frequently Asked Questions
What is the T&S BRASS disc faucet cartridge used for?
The T&S BRASS disc faucet cartridge is used to repair or replace the internal valve mechanism in T&S Brass B-2710 and B-2711 single lever faucets. It controls water flow and temperature in commercial kitchen or laboratory settings. The brass cartridge includes a cartridge O-ring for sealing.
What are the specifications of the T&S BRASS disc faucet cartridge?
The T&S BRASS disc faucet cartridge (MPN 013111-45) is made of brass and has an overall length of 3 1/8 inches. It is compatible with T&S Brass B-2710 and B-2711 single lever faucets. The cartridge includes a cartridge O-ring and is designed as a direct replacement part.
Where to buy the T&S BRASS disc faucet cartridge worldwide?
You can source the T&S BRASS disc faucet cartridge from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this T&S Brass replacement cartridge.
How to install the T&S BRASS disc faucet cartridge?
To install the T&S BRASS disc faucet cartridge, first shut off water supply. Remove the faucet handle and retaining clip, then pull out the old cartridge. Insert the new brass cartridge, ensuring the O-ring is seated properly. Reassemble the handle and test for leaks. Always follow T&S Brass guidelines.
Used in
Common applications for T&S BRASST&S BRASS Products
3G Electric supplies T&S BRASS disc faucet cartridges. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- DUTTON-LAINSON This 1/2-inch needle bearing is a replacement component for DUTTON-LAINSON B2500 material handling equipment. It supports rotating shafts in winches or hoists, reducing friction and wear. Fits DUTTON-LAINSON brand equipment
- BUNTING BEARINGS This nylon thrust washer is designed for dry-run or low-lubrication applications where axial loads are present. It features a 1-1/4 in outer diameter, 0.125 in thickness, and is made from Nylon grade 101. The washer is white and comes in a pack of 25. Suitable for use in conveyors, packaging machinery, and light-duty linear slides
- BUNTING BEARINGS This bronze sleeve bearing is designed for general-purpose industrial applications to support rotating shafts and reduce friction. It is suitable for use in conveyors, pumps, and agricultural machinery where low-speed, moderate-load operation is required. The bearing has an 11/16 in bore, 7/8 in OD, and 1 1/4 in length, supplied in a pack of 3
- BUNTING BEARINGS This general purpose dry-run plastic thrust washer is made from JLON 4200 PTFE material and is red in color. It has a 3/4 in bore, 1 3/8 in OD, and 0.125 in thickness. Suitable for reducing friction between rotating and stationary surfaces in applications with limited lubrication, such as conveyors and light-duty gearboxes. ISO 9001 certified. Pack of 3
- BUNTING BEARINGS This bronze sleeve bearing supports rotating shafts in general-purpose industrial machinery such as conveyors, pumps, and gearboxes. It reduces friction and wear under moderate loads and speeds. Bore: 3/4 in, OD: 15/16 in, length: 1 1/2 in. Sold as a 3-pack
- BUNTING BEARINGS This thrust washer is made from Nylon Material Grade 101 in white color. It has an outer diameter of 1 3/8 in and a thickness of 0.125 in, supplied in a 20-pack. Designed for dry-run applications where lubrication is minimal, it reduces friction and wear between rotating and stationary surfaces in industrial machinery such as conveyors, packaging equipment, and light-duty gearboxes. ISO Certified 9001
