TIMKEN Pillow Block Bearing: 2 15/16 in Bore, Cast Iron, Set Screws
The TIMKEN Pillow Block Bearing (SKU 842W28) is a medium duty pillow block ball bearing with a 2 15/16 in bore, designed for inch-system applications. This cast-iron unit features set screws and a 3 1/2 in shaft…
SKU 3G-OTH-104910
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Pillow Block Bearing (SKU 842W28) is a medium duty pillow block ball bearing with a 2 15/16 in bore, designed for inch-system applications. This cast-iron unit features set screws and a 3 1/2 in shaft height, with a maximum speed of 2300 RPM when grease-lubricated. It requires a 3/4 in mounting bolt size and is identified by manufacturer part number YASM 2-15/16.
Frequently Asked Questions
What is the TIMKEN Pillow Block Bearing YASM 2-15/16 used for?
The TIMKEN YASM 2-15/16 is a medium duty pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast-iron housing with set screws secures the shaft, making it suitable for moderate-load, inch-system applications where reliable shaft alignment and reduced friction are required.
What are the specifications of the TIMKEN Pillow Block Bearing YASM 2-15/16?
The TIMKEN YASM 2-15/16 has a 2 15/16 in bore, cast-iron housing, set screw locking, and a 3 1/2 in shaft height. It achieves a maximum speed of 2300 RPM with grease lubrication and requires a 3/4 in mounting bolt. This inch-system medium duty unit is identified by MPN YASM 2-15/16 and SKU 842W28.
Where to buy TIMKEN Pillow Block Bearing YASM 2-15/16 worldwide?
3G Electric supplies the TIMKEN YASM 2-15/16 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this TIMKEN bearing to any international destination.
How to install a TIMKEN pillow block bearing with set screws?
To install the TIMKEN YASM 2-15/16, first align the housing on a flat surface and tighten the mounting bolts (3/4 in size) to the base. Slide the shaft through the bearing bore, then tighten the set screws evenly against the shaft using a hex key. Apply grease per TIMKEN recommendations and rotate the shaft to check for smooth operation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN medium duty pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
