TIMKEN ER23 General Purpose Cylindrical Insert Bearing
The TIMKEN ER23 is a general purpose cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. This inch-system bearing has a 1 7/16 in bore, 2 53/64 in OD, and 0.938 in…
SKU 3G-OTH-99294
Also listed as: ER 23 · ER-23
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER23 is a general purpose cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. This inch-system bearing has a 1 7/16 in bore, 2 53/64 in OD, and 0.938 in outer ring width, featuring set screws for mounting. It is identified by bearing industry number ER23 and manufacturer part number ER23.
Frequently Asked Questions
What is the TIMKEN ER23 insert bearing used for?
The TIMKEN ER23 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER23 bearing?
The TIMKEN ER23 is an inch-system radial/deep groove ball insert bearing with a 1 7/16 in bore, 2 53/64 in OD, and 0.938 in outer ring width. It features double-sealed closure and set screws for shaft mounting. The bearing industry number and manufacturer part number are both ER23.
Where to buy TIMKEN ER23 bearings worldwide?
3G Electric supplies TIMKEN ER23 bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this general purpose cylindrical insert bearing to any country.
How to install a TIMKEN ER23 insert bearing with set screws?
To install the TIMKEN ER23, clean the shaft and bore, then slide the bearing onto the shaft. Tighten the set screws evenly using a hex key to secure the bearing in place. Ensure the shaft is aligned and the bearing is not cocked. Lubricate per manufacturer recommendations and verify free rotation before operation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.