TIMKEN ER47 General Purpose Cylindrical Insert Bearing
The TIMKEN ER47 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 2 15/16 in bore, a 5 7/64 in OD, and a 1.5 in outer ring width, with…
SKU 3G-OTH-99194
Also listed as: ER 47 · ER-47
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN ER47 is a general purpose cylindrical insert bearing of the radial/deep groove ball type. This inch-system bearing features a 2 15/16 in bore, a 5 7/64 in OD, and a 1.5 in outer ring width, with double-sealed closure and set screw locking. It is identified by the bearing industry number ER47 and manufacturer part number ER47.
Frequently Asked Questions
What is the TIMKEN ER47 insert bearing used for?
The TIMKEN ER47 is a general purpose cylindrical insert bearing used in industrial equipment such as conveyors, fans, and agricultural machinery. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TIMKEN ER47 bearing?
The TIMKEN ER47 is an inch-system radial/deep groove ball insert bearing with a 2 15/16 in bore, 5 7/64 in OD, and 1.5 in outer ring width. It features double-sealed closure and set screw locking. The manufacturer part number and bearing industry number are both ER47.
Where to buy TIMKEN ER47 bearings worldwide?
3G Electric supplies the TIMKEN ER47 bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this bearing to any international destination.
How to install a TIMKEN ER47 insert bearing?
To install the TIMKEN ER47, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to lock the bearing in place. Ensure the shaft is aligned and the bearing is seated fully. Follow standard practices for double-sealed bearings to avoid seal damage.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.