TIMKEN SAK 1-1/4S Low-Base Pillow Block Ball Bearing
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 13/16 in shaft height and a 1/2 in…
SKU 3G-OTH-105908
Also listed as: SAK114S · SAK 1 1 4S · SAK-1-1-4S
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing with a 1 1/4 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 13/16 in shaft height and a 1/2 in mounting bolt size, designed for industrial shaft support applications.
Frequently Asked Questions
What is the TIMKEN SAK 1-1/4S pillow block bearing used for?
The TIMKEN SAK 1-1/4S is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, fans, and material handling equipment where a compact, cast-iron housing with set screw locking is required for reliable shaft support.
What are the specifications of the TIMKEN SAK 1-1/4S?
The TIMKEN SAK 1-1/4S has a 1 1/4 in bore, cast iron housing, set screw locking, and a 1 13/16 in shaft height. It uses inch-system measurements with a 1/2 in mounting bolt size. This low-base pillow block bearing is designed for industrial shaft support applications.
Where to buy the TIMKEN SAK 1-1/4S worldwide?
You can source the TIMKEN SAK 1-1/4S worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this TIMKEN pillow block bearing.
How to install the TIMKEN SAK 1-1/4S pillow block bearing?
To install the TIMKEN SAK 1-1/4S, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the mounting holes with the base, and tighten the 1/2 in bolts evenly. Secure the set screws against the shaft using a hex key, then verify free rotation before operation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN low-base pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
