TIMKEN SAK 1/2 Low-Base Pillow Block Ball Bearing
The TIMKEN SAK 1/2 is an inch-system low-base pillow block ball bearing with a 1/2 in bore, cast iron housing, and set screw locking. It features a 1 1/16 in shaft height, 3/8 in mounting bolt size, and a maximum…
SKU 3G-OTH-103833
Also listed as: SAK12 · SAK 1 2 · SAK-1-2
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN SAK 1/2 is an inch-system low-base pillow block ball bearing with a 1/2 in bore, cast iron housing, and set screw locking. It features a 1 1/16 in shaft height, 3/8 in mounting bolt size, and a maximum operating temperature of 200°F.
Frequently Asked Questions
What is the TIMKEN SAK 1/2 pillow block bearing used for?
The TIMKEN SAK 1/2 is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery. Its cast iron housing and set screw locking make it suitable for light-to-moderate loads in conveyors, fans, and agricultural equipment where inch-system components are required.
What are the specifications of the TIMKEN SAK 1/2 pillow block bearing?
The TIMKEN SAK 1/2 has a 1/2 in bore, cast iron housing, set screw locking, 1 1/16 in shaft height, 3/8 in mounting bolt size, and a maximum operating temperature of 200°F. It is an inch-system low-base pillow block ball bearing with manufacturer part number SAK 1/2.
Where to buy the TIMKEN SAK 1/2 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAK 1/2 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN SAK 1/2 pillow block bearing?
To install the TIMKEN SAK 1/2, mount the bearing on a clean, flat surface using 3/8 in bolts. Align the shaft through the bore, tighten the set screws evenly against the shaft, and ensure the housing is level. Do not exceed 200°F operating temperature. Follow standard bearing installation practices.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN low-base pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
