TIMKEN SAS 2S General Purpose Pillow Block Ball Bearing
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 2-inch bore, designed for inch-system applications. This cast-iron housed bearing features set-screw locking and a 2 1/4-inch shaft…
SKU 3G-OTH-108753
Also listed as: SAS2S · SAS-2S
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 2-inch bore, designed for inch-system applications. This cast-iron housed bearing features set-screw locking and a 2 1/4-inch shaft height, with a 4.5-inch overall height. It accommodates a 5/8-inch mounting bolt size and is identified by manufacturer part number SAS 2S.
Frequently Asked Questions
What is the TIMKEN SAS 2S pillow block bearing used for?
The TIMKEN SAS 2S pillow block bearing supports rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast-iron housing and set-screw locking suit moderate-load, inch-system applications where reliable shaft alignment and easy mounting are required.
What are the specifications of the TIMKEN SAS 2S pillow block bearing?
The TIMKEN SAS 2S has a 2-inch bore, 2 1/4-inch shaft height, and 4.5-inch overall height. It uses a cast-iron housing with set-screw locking, accommodates a 5/8-inch mounting bolt, and is designed for inch-system measurements. The manufacturer part number is SAS 2S.
Where to buy the TIMKEN SAS 2S pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 2S pillow block bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this bearing to any country.
How to install a TIMKEN SAS 2S pillow block bearing?
Mount the bearing on a clean, flat surface using 5/8-inch bolts through the base slots. Align the shaft with the bore, then tighten the set screws evenly against the shaft using a hex key. Ensure the shaft rotates freely before finalizing the installation.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
