TIMKEN SCJ 1-11/16 General Purpose Flange-Mount Ball Bearing
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #2 equivalent…
SKU 3G-OTH-105593
Also listed as: SCJ11116 · SCJ 1 11 16 · SCJ-1-11-16
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #2 equivalent lubricant. The bearing has a 7/16 in mounting bolt size and is designed for inch-system applications (MPN SCJ 1-11/16).
Frequently Asked Questions
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used in industrial equipment such as conveyors, fans, and material handling systems. It supports radial loads and accommodates shaft misalignment in inch-system applications. The cast iron housing and set screw locking provide secure mounting in moderate-duty environments.
What are the specifications of the TIMKEN SCJ 1-11/16 flange bearing?
The TIMKEN SCJ 1-11/16 flange bearing has a 1 11/16 in cylindrical bore, a cast iron housing with set screws, and a 5 23/64 in length. It uses NLGI #2 equivalent lubricant and requires a 7/16 in mounting bolt. The system of measurement is inch, and the manufacturer part number is SCJ 1-11/16.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the TIMKEN SCJ 1-11/16 or other models. We supply genuine TIMKEN components for industrial applications.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes, and tighten the 7/16 in mounting bolts evenly. Secure the shaft by tightening the set screws against the shaft. Apply NLGI #2 grease if needed. Always follow manufacturer guidelines for torque and alignment.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
