TIMKEN YCJ1-1/4 SGT General Purpose Flange-Mount Ball Bearing
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/4 in cylindrical bore, a not-split cast iron housing, and a square flange design. It uses NLGI 2 Lithium Complex Grease, has a…
SKU 3G-OTH-117384
Also listed as: YCJ114SGT · YCJ1 1 4 SGT · YCJ1-1-4-SGT
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 1/4 in cylindrical bore, a not-split cast iron housing, and a square flange design. It uses NLGI 2 Lithium Complex Grease, has a mounting bolt size of 1/2 in, and is secured with set screws. This inch-system unit is identified by manufacturer part number YCJ1-1/4 SGT.
Frequently Asked Questions
What is the TIMKEN Flange Mount Bearing YCJ1-1/4 SGT used for?
This TIMKEN flange mount bearing is used in general purpose industrial applications such as conveyors, fans, and material handling equipment. Its square cast iron housing and set screw locking provide reliable shaft support in moderate-load, low-to-medium-speed environments.
What are the specifications of the TIMKEN Flange Mount Bearing YCJ1-1/4 SGT?
The TIMKEN YCJ1-1/4 SGT has a 1 1/4 in cylindrical bore, a not-split cast iron housing, and a square flange design. It uses NLGI 2 Lithium Complex Grease, requires a 1/2 in mounting bolt, and is secured with set screws. It is an inch-system unit.
Where to buy TIMKEN Flange Mount Bearing YCJ1-1/4 SGT worldwide?
You can source the TIMKEN YCJ1-1/4 SGT flange mount bearing from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct TIMKEN part for your application.
How to install a TIMKEN Flange Mount Bearing with set screws?
To install, clean the shaft and bore, slide the bearing onto the shaft, and align the flange bolt holes. Tighten the set screws evenly against the shaft using a hex key, then secure the flange with 1/2 in bolts. Apply moderate torque per TIMKEN guidelines to avoid shaft damage.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
