TRAMEC SLOAN Flared Fitting Adapter: 1/2 in OD x 3/8 in Pipe Fitting Size, Threaded
The TRAMEC SLOAN 59IF-8-6 is a DOT Brass Inverted Flare Tube Fitting, configured as a Flared Fitting Adapter with a 1/2 in OD x 3/8 in Pipe Fitting Size. This threaded brass adapter features a 3/4"-18 Thread Size A…
SKU 3G-OTH-661388
Also listed as: 59IF86 · 59IF 8 6
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The TRAMEC SLOAN 59IF-8-6 is a DOT Brass Inverted Flare Tube Fitting, configured as a Flared Fitting Adapter with a 1/2 in OD x 3/8 in Pipe Fitting Size. This threaded brass adapter features a 3/4"-18 Thread Size A and complies with DOT/SAE J1402A standards. 3G Electric interprets your demand for this genuine industrial fitting, sourcing it across our 14 departments with specialist depth in controls and fluid handling.
Frequently Asked Questions
What is the TRAMEC SLOAN 59IF-8-6 flared fitting adapter used for?
The TRAMEC SLOAN 59IF-8-6 is a DOT Brass Inverted Flare Tube Fitting used to connect 1/2 in OD tubing to a 3/8 in pipe thread in air brake and fluid power systems. It complies with DOT/SAE J1402A standards for safety-critical applications in commercial vehicles and industrial equipment.
What are the specifications of the TRAMEC SLOAN 59IF-8-6?
The TRAMEC SLOAN 59IF-8-6 is a threaded brass flared fitting adapter with a 1/2 in OD x 3/8 in pipe fitting size. It has a 3/4"-18 Thread Size A and meets DOT/SAE J1402A standards. The manufacturer part number is 59IF-8-6.
Where to buy the TRAMEC SLOAN 59IF-8-6 worldwide?
3G Electric supplies the genuine TRAMEC SLOAN 59IF-8-6 flared fitting adapter worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this DOT-compliant brass fitting to your facility, regardless of location.
How to install a TRAMEC SLOAN inverted flare tube fitting?
To install the TRAMEC SLOAN 59IF-8-6, ensure the tubing end is clean and properly flared. Apply a compatible thread sealant to the 3/4"-18 male thread, then hand-tighten the adapter into the female port. Use a wrench to tighten an additional 1/4 to 1/2 turn, avoiding over-torquing to prevent brass damage.
Used in
Common applications for TRAMEC SLOANTRAMEC SLOAN Products
3G Electric supplies TRAMEC SLOAN dot brass inverted flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
