TRITAN Insert Bearing: ER-18, 1 1/8 in Bore, 2 7/16 in OD, 0.874 in Outer Ring Wd

The TRITAN ER-18 is a retaining-ring cylindrical insert bearing used in industrial machinery such as conveyors, fans, and agricultural equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.

The TRITAN ER-18 is an inch-system insert bearing with a 1 1/8-inch bore, 2 7/16-inch outer diameter, and 0.874-inch outer ring width. It is a radial/deep groove ball type with double-sealed closure and set-screw locking. The bearing industry number is ER-18, and the manufacturer part number is ER18.

3G Electric supplies the TRITAN ER-18 insert bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your facility. Contact our team to source this ER-18 bearing for your application, with lead time provided on request.

To install the TRITAN ER-18, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to secure the inner ring. Ensure the retaining ring is seated in the housing groove. Avoid over-tightening to prevent distortion. Lubricate per manufacturer guidelines.