TRITAN Retaining-Ring Cylindrical Insert Bearing ER18
The TRITAN ER-18 is a retaining-ring cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. It features a 1 1/8-inch bore, a 2 7/16-inch outer diameter, and a 0.874-inch…
SKU 3G-OTH-98893
Also listed as: ER 18 · ER-18
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-18 is a retaining-ring cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. It features a 1 1/8-inch bore, a 2 7/16-inch outer diameter, and a 0.874-inch outer ring width, secured with set screws. This inch-system bearing is identified by the industry number ER-18 and manufacturer part number ER18.
Frequently Asked Questions
What is the TRITAN ER-18 insert bearing used for?
The TRITAN ER-18 is a retaining-ring cylindrical insert bearing used in industrial machinery such as conveyors, fans, and agricultural equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while the double-sealed closure protects against contaminants in dusty or wet environments.
What are the specifications of the TRITAN ER-18 bearing?
The TRITAN ER-18 is an inch-system insert bearing with a 1 1/8-inch bore, 2 7/16-inch outer diameter, and 0.874-inch outer ring width. It is a radial/deep groove ball type with double-sealed closure and set-screw locking. The bearing industry number is ER-18, and the manufacturer part number is ER18.
Where to buy TRITAN ER-18 bearings worldwide?
3G Electric supplies the TRITAN ER-18 insert bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your facility. Contact our team to source this ER-18 bearing for your application, with lead time provided on request.
How to install a TRITAN ER-18 insert bearing with set screws?
To install the TRITAN ER-18, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly using a hex key to secure the inner ring. Ensure the retaining ring is seated in the housing groove. Avoid over-tightening to prevent distortion. Lubricate per manufacturer guidelines.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.