TRITAN ER30 Retaining-Ring Cylindrical Insert Bearing
The TRITAN ER-30 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 7/8 in bore, 3 17/32 in OD, and 1.126 in outer ring width…
SKU 3G-OTH-99970
Also listed as: ER 30 · ER-30
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-30 is a retaining-ring cylindrical insert bearing, classified as a radial/deep groove ball type with double-sealed closure. It features a 1 7/8 in bore, 3 17/32 in OD, and 1.126 in outer ring width, secured by set screws. This inch-system bearing is identified by industry number ER-30 and manufacturer part number ER30.
Frequently Asked Questions
What is the TRITAN ER-30 insert bearing used for?
The TRITAN ER-30 is a retaining-ring cylindrical insert bearing used in industrial machinery requiring radial load support and misalignment accommodation. Common applications include conveyors, agricultural equipment, and material handling systems where a double-sealed, set-screw locking design is needed.
What are the specifications of the TRITAN ER-30 bearing?
The TRITAN ER-30 is an inch-system radial/deep groove ball insert bearing with a 1 7/8 in bore, 3 17/32 in OD, and 1.126 in outer ring width. It features double-sealed closure and set-screw locking. The bearing industry number is ER-30, and the manufacturer part number is ER30.
Where to buy the TRITAN ER-30 bearing worldwide?
3G Electric supplies the TRITAN ER-30 insert bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this retaining-ring cylindrical insert bearing.
How to install a TRITAN ER-30 set-screw insert bearing?
To install the TRITAN ER-30, first ensure the shaft is clean and within tolerance. Slide the bearing onto the shaft, then tighten the set screws evenly to the manufacturer's recommended torque. Avoid over-tightening to prevent race distortion. Always follow standard bearing installation practices for double-sealed units.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.