TRITAN Insert Bearing: ER-38, 2 3/8 in Bore, 4 21/64 in OD, 1.252 in Outer Ring Wd
The TRITAN ER-38 is a retaining-ring cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. It features a 2 3/8 in bore, 4 21/64 in OD, and 1.252 in outer ring width…
SKU 3G-OTH-100348
Also listed as: ER 38 · ER-38
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The TRITAN ER-38 is a retaining-ring cylindrical insert bearing, specifically a radial/deep groove ball type with double-sealed closure. It features a 2 3/8 in bore, 4 21/64 in OD, and 1.252 in outer ring width, secured by set screws. This inch-system bearing is identified by industry number ER-38 and manufacturer part number ER38.
Frequently Asked Questions
What is the TRITAN ER-38 insert bearing used for?
The TRITAN ER-38 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design handles moderate radial and axial loads, while double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the TRITAN ER-38 bearing?
The TRITAN ER-38 has a 2 3/8 in bore, 4 21/64 in OD, and 1.252 in outer ring width. It is an inch-system radial/deep groove ball insert bearing with double-sealed closure and set-screw locking. The bearing industry number is ER-38, and the manufacturer part number is ER38.
Where to buy the TRITAN ER-38 bearing worldwide?
3G Electric supplies the TRITAN ER-38 insert bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this inch-system retaining-ring bearing.
How to install a TRITAN ER-38 set-screw insert bearing?
To install the TRITAN ER-38, clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the retaining ring is fully seated in the housing groove. Always follow generic bearing installation best practices.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
