TRITAN UCP205-14 General Purpose Pillow Block Ball Bearing
The TRITAN UCP205-14 is a general purpose pillow block ball bearing with a 7/8 in bore, constructed from cast iron and featuring set screw locking. It has a 1 27/64 in shaft height, a maximum operating temperature of…
SKU 3G-OTH-103831
Also listed as: UCP20514 · UCP205 14
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TRITAN UCP205-14 is a general purpose pillow block ball bearing with a 7/8 in bore, constructed from cast iron and featuring set screw locking. It has a 1 27/64 in shaft height, a maximum operating temperature of 250°F, and is designed for an M10 mounting bolt size. This inch-system bearing meets AFBMA standards.
Frequently Asked Questions
What is the TRITAN UCP205-14 pillow block bearing used for?
The TRITAN UCP205-14 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and agricultural equipment. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications up to 250°F.
What are the specifications of the TRITAN UCP205-14 pillow block bearing?
The TRITAN UCP205-14 has a 7/8 in bore, cast iron housing with set screw locking, 1 27/64 in shaft height, M10 mounting bolt size, and a maximum operating temperature of 250°F. It meets AFBMA standards and uses inch-system measurements. The manufacturer part number is UCP205-14.
Where to buy the TRITAN UCP205-14 pillow block bearing worldwide?
3G Electric supplies the TRITAN UCP205-14 pillow block bearing worldwide. As a global industrial equipment distributor established in 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TRITAN UCP205-14 pillow block bearing?
To install the TRITAN UCP205-14, first ensure the shaft is clean and the bearing bore matches the 7/8 in shaft diameter. Align the housing on a flat surface, tighten the M10 mounting bolts, then secure the set screws onto the shaft. Avoid over-tightening to prevent housing distortion. Follow AFBMA installation guidelines for best results.
Used in
Common applications for TRITANTRITAN Products
3G Electric supplies TRITAN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
