TY-RAP MPNY-750-9-C Adhesive Mount Cable Tie Base
The TY-RAP Cable Tie Mounting Base is an adhesive mount cable tie base designed for use with cable ties up to 50 lb tensile strength. It features a 0.16 in slot width and 0.06 in slot height, with dimensions of 0.74…
SKU 3G-OTH-53794
Also listed as: MPNY7509C · MPNY 750 9 C
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The TY-RAP Cable Tie Mounting Base is an adhesive mount cable tie base designed for use with cable ties up to 50 lb tensile strength. It features a 0.16 in slot width and 0.06 in slot height, with dimensions of 0.74 in L x 0.74 in W x 0.2 in H in a natural color. This product is sold in a 100-pack and is manufactured by TY-RAP under part number MPNY-750-9-C.
Frequently Asked Questions
What is the TY-RAP cable tie mounting base used for?
The TY-RAP cable tie mounting base is used to secure cable ties up to 50 lb tensile strength to flat surfaces. It provides a fixed anchor point for cable management in electrical panels, control cabinets, and industrial wiring installations. The adhesive backing allows quick mounting without drilling.
What are the specifications of the TY-RAP cable tie mounting base?
The TY-RAP mounting base has a 0.74 in L x 0.74 in W x 0.2 in H footprint, with a 0.16 in slot width and 0.06 in slot height. It is natural in color and sold in a 100-pack. The base is designed for cable ties up to 50 lb tensile strength, part number MPNY-750-9-C.
Where to buy TY-RAP cable tie mounting bases worldwide?
3G Electric supplies TY-RAP cable tie mounting bases worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance for international orders. Contact us to source the MPNY-750-9-C 100-pack or other TY-RAP cable management products for delivery to your location.
How to install a TY-RAP adhesive mount cable tie base?
Clean the mounting surface thoroughly with isopropyl alcohol to remove grease and dust. Peel the adhesive liner from the TY-RAP base and press firmly onto the surface for 30 seconds. Allow 24 hours for full bond strength before routing cable ties through the slot. Avoid mounting on porous or uneven surfaces.
Used in
Common applications for TY-RAPTY-RAP Products
3G Electric supplies TY-RAP adhesive mount cable tie bases. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.