UEI TEST INSTRUMENTS Type K Thermocouple for Gas Applications
The UEI TEST INSTRUMENTS Surface Temperature Probe (MPN ATT39) is a Type K thermocouple for gas applications with a temperature range of -40°F to 950°F (-40°C to 510°C). It features a 3 ft 7 in fluoroplastic-coated…
SKU 3G-OTH-179106
Also listed as: ATT 39 · ATT-39
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The UEI TEST INSTRUMENTS Surface Temperature Probe (MPN ATT39) is a Type K thermocouple for gas applications with a temperature range of -40°F to 950°F (-40°C to 510°C). It features a 3 ft 7 in fluoroplastic-coated cable with a maximum wire gauge of 28 AWG.
Frequently Asked Questions
What is the UEI TEST INSTRUMENTS Surface Temperature Probe used for?
This Type K thermocouple is designed for measuring surface temperatures in gas applications. It is commonly used by HVAC technicians and plant engineers to monitor flue, pipe, or duct surfaces where accurate contact readings are needed.
What are the specifications of the UEI TEST INSTRUMENTS ATT39 probe?
The ATT39 is a Type K thermocouple with a temperature range of -40°F to 950°F (-40°C to 510°C). It has a 3 ft 7 in fluoroplastic-coated cable and a maximum wire gauge of 28 AWG. The brand is UEI TEST INSTRUMENTS.
Where to buy the UEI TEST INSTRUMENTS ATT39 probe worldwide?
3G Electric supplies the UEI TEST INSTRUMENTS ATT39 surface temperature probe worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the UEI TEST INSTRUMENTS surface temperature probe?
Attach the probe tip firmly to the clean, flat surface using a clamp or high-temperature tape for accurate readings. Ensure the Type K connector is properly inserted into a compatible meter. Avoid bending the cable sharply near the probe head to prevent damage.
Used in
Common applications for UEI TEST INSTRUMENTSUEI TEST INSTRUMENTS Products
3G Electric supplies UEI TEST INSTRUMENTS thermocouples for gas applications. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- Fireye Ultraviolet flame scanner for combustion systems. Detects flame presence by sensing UV radiation. Used in burners, boilers, and furnaces to monitor burner operation
- Fireye Heater accessory temperature sensor for monitoring temperature in combustion and HVAC systems. Used in boilers, furnaces, and process heaters to support safe burner operation
- Fireye Ultraviolet flame scanner for detecting UV radiation from burner flames. Used in burner management systems for industrial boilers, furnaces, and process heaters to verify flame presence and support safe operation
- Fireye UV90L Series UV Flame Scanners. The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard fuel gases, some waste gases and light oil fuels such as No. 2 oil. Flames from heavier oils can be detected with UV scanners but the unburned fuel shroud and/or atomization shroud can block the passage of the UV from the flame zone to the UV tube, causing nuisance burner/boiler trips. Infrared detection is recommended for fuel oil heavier than No. 2, and some installations where waste gases are burned together with natural gas as the main flame — UV90L