UHMW Polyethylene Bar: 0.5 in Thick
The UHMW Polyethylene Bar (0.5 in Thick, 1 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW sheet/bar with a tensile strength of 4,400 psi and an impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-775).
SKU 3G-OTH-592471
Also listed as: BULKPSUHMW775 · BULK PS UHMW 775
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Ask a question
Request a QuoteAsk a question
Product Description
The UHMW Polyethylene Bar (0.5 in Thick, 1 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW sheet/bar with a tensile strength of 4,400 psi and an impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-775).
Frequently Asked Questions
What is UHMW polyethylene bar used for?
UHMW polyethylene bar is used for wear strips, chute liners, conveyor guides, and material-handling components where low friction and high impact resistance are needed. Its acrylic adhesive backing simplifies installation on flat surfaces in industrial machinery, packaging lines, and food-processing equipment.
What are the specifications of UHMW polyethylene bar 0.5 in thick?
This UHMW polyethylene bar is 0.5 in thick, 1 in wide, 4 ft long, opaque white, with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in. It features an acrylic adhesive backing for easy mounting. The manufacturer part number is BULK-PS-UHMW-775.
Where to buy UHMW polyethylene bar with adhesive backing worldwide?
3G Electric supplies and delivers this UHMW polyethylene bar worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the material reaches your facility. Contact us for availability and lead time on this genuine industrial material.
How to install acrylic adhesive backed UHMW bar?
Clean the mounting surface thoroughly to remove grease and debris. Peel the release liner from the acrylic adhesive backing, press the UHMW bar firmly into place, and apply even pressure for several seconds. Allow 24 hours at room temperature for maximum bond strength before subjecting to load.
UHMW Products
3G Electric supplies UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. We supply genuine products and their technical documentation.
