USA INDUSTRIALS Schedule 40 Threaded Pipe Nipple
USA INDUSTRIALS Schedule 40 Pipe Nipple in aluminum, threaded on both ends with 1/8 in nominal pipe size and 3 in overall length. Features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @…
SKU 3G-OTH-651032
Also listed as: ZUSAPF21070 · ZUSA PF 21070
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
USA INDUSTRIALS Schedule 40 Pipe Nipple in aluminum, threaded on both ends with 1/8 in nominal pipe size and 3 in overall length. Features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 aluminum pipe nipple used for?
This aluminum pipe nipple connects two male NPT threaded fittings in low-pressure fluid or air systems. It is commonly used in instrumentation, pneumatic lines, and general industrial piping where corrosion resistance and light weight are needed, with a maximum operating pressure of 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21070 pipe nipple?
This Schedule 40 pipe nipple is made of aluminum with a 1/8 in nominal pipe size and 3 in overall length. It features Male NPT x Male NPT threaded connections on both ends and a maximum operating pressure of 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-21070.
Where to buy USA INDUSTRIALS aluminum pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS aluminum pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-21070 or similar Schedule 40 threaded nipples for your application.
How to install a threaded aluminum pipe nipple?
Apply a compatible thread sealant or PTFE tape to the male NPT threads. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid over-tightening to prevent cracking the aluminum. Ensure the system pressure does not exceed 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
