USA INDUSTRIALS Pipe Nipple: Aluminum, 1/8 in Nominal Pipe Size, 3 1/2 in Overall Lg
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 1/8 in nominal pipe size and 3 1/2 in overall length. It features Male NPT x Male NPT connections and a maximum…
SKU 3G-OTH-651031
Also listed as: ZUSAPF21071 · ZUSA PF 21071
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 1/8 in nominal pipe size and 3 1/2 in overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded fittings in low-pressure fluid or air systems. Its 1/8 in nominal size and 3 1/2 in length suit compact manifolds, instrumentation lines, or pneumatic controls where corrosion resistance and light weight are needed.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21071?
The USA INDUSTRIALS pipe nipple has a 1/8 in nominal pipe size, 3 1/2 in overall length, and male NPT x male NPT connections. It is Schedule 40 aluminum with a maximum operating pressure of 125 psi @ 72°F. The side A connection type is threaded.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21071 worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS pipe nipple ZUSA-PF-21071 to worldwide locations. As a global industrial solutions provider, we handle full logistics and customs clearance so you receive the correct threaded aluminum nipple for your application.
How to install a threaded aluminum pipe nipple?
Apply pipe thread sealant or PTFE tape to both male NPT ends. Hand-tighten the nipple into the female port, then use wrenches on the nipple's hex section for final torque—avoid over-tightening aluminum to prevent thread galling. Verify pressure rating does not exceed 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
