USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 1/4 in nominal pipe size and 3 1/2 in overall length. It features Male NPT x Male NPT connections and a maximum…
SKU 3G-OTH-651004
Also listed as: ZUSAPF21098 · ZUSA PF 21098
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 1/4 in nominal pipe size and 3 1/2 in overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded fittings in low-pressure fluid or air systems. It is commonly used in pneumatic lines, instrumentation panels, and general industrial piping where corrosion resistance and lightweight construction are needed.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21098?
The USA INDUSTRIALS pipe nipple has a 1/4 in nominal pipe size, 3 1/2 in overall length, and male NPT threads on both ends. It is Schedule 40 aluminum with a maximum operating pressure of 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-21098.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21098 worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple ZUSA-PF-21098 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 aluminum nipple with 1/4 in NPT threads.
How to install a threaded aluminum pipe nipple?
Apply thread sealant or PTFE tape to the male NPT threads, then hand-tighten into the female fitting. Use a wrench on the nipple's hex section for final tightening, but avoid over-torquing to prevent thread damage. Maximum operating pressure is 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
