USA INDUSTRIALS Schedule 40 Pipe Nipple with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, 304 Stainless Steel nipple, 72 inches long, with a 1/8-inch size, threaded on both ends (Male NPT x Male NPT), and welded. It includes a pre-applied thread sealant…
SKU 3G-OTH-651092
Also listed as: ZUSAPF21326 · ZUSA PF 21326
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, 304 Stainless Steel nipple, 72 inches long, with a 1/8-inch size, threaded on both ends (Male NPT x Male NPT), and welded. It includes a pre-applied thread sealant and has a maximum operating pressure of 150 psi at 72 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS 304 stainless steel pipe nipple used for?
This Schedule 40, 1/8 in, 72 in long nipple with Male NPT threads on both ends is used to connect piping in industrial fluid, gas, or air systems. The 304 stainless steel resists corrosion, and the pre-applied thread sealant simplifies installation in applications up to 150 psi at 72 °F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21326 pipe nipple?
This pipe nipple is 304 stainless steel, Schedule 40, 1/8 in size, 72 in long, with Male NPT x Male NPT threaded ends and welded construction. It includes pre-applied thread sealant and has a maximum operating pressure of 150 psi at 72 °F. The manufacturer part number is ZUSA-PF-21326.
Where to buy a USA INDUSTRIALS 304 stainless steel pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-21326 pipe nipple worldwide. We handle full logistics and customs clearance, ensuring this Schedule 40, 1/8 in, 72 in long nipple with pre-applied thread sealant reaches your facility. Contact us for availability and lead time.
How to install a Schedule 40 pipe nipple with pre-applied thread sealant?
Clean both male threads before assembly. Apply pipe joint compound or PTFE tape only if additional sealing is needed, as the nipple includes pre-applied sealant. Tighten to the recommended torque for 1/8 in NPT connections, avoiding over-tightening. Do not exceed 150 psi at 72 °F operating pressure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
