USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 2-inch nominal pipe size and 60-inch overall length. It features Male NPT x Male NPT connections and a maximum…
SKU 3G-OTH-650847
Also listed as: ZUSAPF21730 · ZUSA PF 21730
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple threaded on both ends, with a 2-inch nominal pipe size and 60-inch overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple is used to connect two pipes or fittings in low-pressure fluid or air systems. Its 2-inch nominal size and 60-inch length suit industrial plumbing, pneumatic lines, and structural applications where corrosion resistance and light weight are needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21730 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-21730 is a Schedule 40 aluminum pipe nipple with a 2-inch nominal pipe size and 60-inch overall length. It has Male NPT x Male NPT threaded connections on both ends and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this Schedule 40 aluminum nipple with 2-inch NPT threads to your facility, regardless of location.
How to install a threaded aluminum pipe nipple?
Apply pipe thread sealant or PTFE tape to the Male NPT threads. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing aluminum to prevent thread damage. Maximum operating pressure is 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
