USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum nipple threaded on both ends, with a 3 in nominal pipe size and 18 in overall length. It features Male NPT x Male NPT connections and a maximum operating…
SKU 3G-OTH-650820
Also listed as: ZUSAPF21758 · ZUSA PF 21758
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum nipple threaded on both ends, with a 3 in nominal pipe size and 18 in overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded pipes or fittings in low-pressure fluid or air systems. It is commonly used in industrial plumbing, pneumatic lines, and corrosion-resistant applications where lightweight, non-sparking material is required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21758 pipe nipple?
This pipe nipple has a 3 in nominal pipe size, 18 in overall length, and Schedule 40 wall thickness. It features Male NPT x Male NPT threaded connections on both ends, with a maximum operating pressure of 125 psi at 72°F. The manufacturer part number is ZUSA-PF-21758.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this Schedule 40 aluminum nipple with 3 in NPT threads.
How to install a threaded aluminum pipe nipple?
Apply thread sealant or PTFE tape to the male NPT threads, then hand-tighten the nipple into the female fitting. Use a wrench on the nipple's hex section for final tightening—avoid over-torquing aluminum to prevent thread damage. Do not exceed 125 psi at 72°F operating pressure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
