USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
USA INDUSTRIALS Schedule 40 Brass Pipe Nipple, threaded on both ends with 1 in Male NPT x Male NPT connections, 48 in overall length, and PTFE thread sealant. Rated for maximum operating pressure of 125 psi @ 72°F…
SKU 3G-OTH-649871
Also listed as: ZUSAPF21818 · ZUSA PF 21818
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
USA INDUSTRIALS Schedule 40 Brass Pipe Nipple, threaded on both ends with 1 in Male NPT x Male NPT connections, 48 in overall length, and PTFE thread sealant. Rated for maximum operating pressure of 125 psi @ 72°F and maximum steam pressure of 755 psi @ 300 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 brass pipe nipple used for?
This brass pipe nipple connects two male NPT threaded fittings in industrial piping systems for water, air, or steam service. Its 48-inch length bridges gaps in plumbing, HVAC, or process lines where a rigid, corrosion-resistant brass section is required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21818 pipe nipple?
This Schedule 40 brass nipple has 1-inch Male NPT threads on both ends, 48-inch overall length, and PTFE thread sealant. Maximum operating pressure is 125 psi at 72°F; maximum steam pressure is 755 psi at 300°F. Manufacturer part number ZUSA-PF-21818.
Where to buy USA INDUSTRIALS brass pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS brass pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote on the ZUSA-PF-21818 or other sizes and schedules.
How to install a threaded brass pipe nipple with PTFE sealant?
Apply pipe thread compound or PTFE tape to the male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex ends for final tightening—avoid over-torquing brass to prevent cracking. Test the joint at operating pressure before service.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.