USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass nipple threaded on both ends with Male NPT x Male NPT connections, a 1/2 in nominal pipe size, and a 10 in overall length. It features PTFE thread sealant and is…
SKU 3G-OTH-649743
Also listed as: ZUSAPF21837 · ZUSA PF 21837
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass nipple threaded on both ends with Male NPT x Male NPT connections, a 1/2 in nominal pipe size, and a 10 in overall length. It features PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 267 psi @ 450 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS brass pipe nipple used for?
This Schedule 40 brass nipple connects two male NPT threaded fittings in plumbing, pneumatic, or steam lines. Its PTFE sealant and 125 psi @ 72°F rating suit moderate-pressure water, air, and steam applications across industrial plants, HVAC systems, and process equipment.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21837?
The nipple has a 1/2 in nominal pipe size, 10 in overall length, and Male NPT x Male NPT connections. It is rated for 125 psi @ 72°F operating pressure and 267 psi @ 450 °F steam pressure. The thread sealant is PTFE, and it meets Schedule 40 wall thickness.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21837 worldwide?
3G Electric supplies and delivers this USA INDUSTRIALS brass pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the part reaches your facility, whether for a plant in Europe, Asia, or the Americas.
How to install a brass pipe nipple with PTFE thread sealant?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1–2 turns. Avoid over-tightening to prevent stress cracking. Test the joint at operating pressure before full service.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.